Description: 10/100 Base-TX RJ45 1x1 Tab-UP with LEDs 8-pin (J1 series) and 6-pin (JP series) integrated magnetics connector, designed to support applications, such as ADSL modems, LAN-on-Motherboard, and Hub and Switches.
Features and Benefits: • RoHS-5 peak wave solder temperature rating 235°C • RoHS-6 peak wave solder temperature rating 260°C • Suitable for CAT 5 & 6 Fast Ethernet Cable or better UTP
Electrical Performance Summary: • Meets IEEE 802.3 specification • 350µH minimum OCL with 8mA bias current • High performance for maximum EMI suppression
Features and Benefits: ● Compliant with IEEE 802.3 standard ● Qualified with top 10Gig PHY Manufacturers ● RoHS peak wave solder temperature rating 260°C ● Low profile package for PCI Express ● Fine-tune magnetics to specific PHY vendors
Description: 10/100/1000 Base-T RJ45 single port (1x1) Tab-UP with or without LEDs integrated magnetics connector (ICM), designed to support applications, such as Network Interface Cards (NIC), LAN-on-Motherboard (LOM), and PC applications.
Features and Benefits: ■ RoHS-5 peak wave solder temperature rating 235°C ■ RoHS-6 peak wave solder temperature rating 260°C ■ Suitable for CAT 5 and 6 Fast Ethernet cable or better UTP
Electrical Performance Summary: ■ Meets IEEE 802.3 specification ■ 350µH minimum OCL with 8mA bias current ■ High performance for maximum EMI suppression
Description: 10/100Base-TX surface mount RJ45 single port (1x1) Tab-UP/DOWN with or without LEDs Integrated Magnetics Connector, designed to support applications such as: Set Top Box and Network Interface Cards (NIC).
Features and Benefits: ● RoHS-5 peak reflow temperature rating 235°C ● RoHS-6 peak reflow temperature rating 245°C ● J0C SMT product, reduced size and low cost alternative to JV series
Electrical Performance Summary: ● Meets IEEE 802.3 specification ● High performance for maximum EMI suppression ● Minimum 1500Vrms isolation per IEEE 802.3 requirement
OVERVIEW These compact, high-end matrix switches give you an easy way to set up cross-point switching of video and audio signals in your digital signage or other multimedia distribution application.
FeATures » For cross-point switching of PC or HD (VGA or YPbPr) video signals. » Switch using front-panel buttons, IP, or via RS-232 commands (depending on model). » Switched video output can also be blanked. » Outputs PC resolutions up to 1900 x 1200 and HD video up to 1080p. Also works with analog SD video. » Has two independent serial RS-232 interfaces, a screw terminal and an RJ-45 port. Control the switch remotely through either port. » Use front panel to view switch routings (ties) from either the input or the output side. » Intuitive up and down arrow buttons on frontpanel keypad enable you to check channel status and configure new input/output ties. » For easy recall, stores up to eight preset routing patterns. Reconfigure for frequently used switch patterns at the push of a button. » Can also be programmed to switch between preset patterns at certain times of the day— great for automating video distribution to digital signage. » For scheduling reliability, features a real-time clock with battery backup. » Ideal for large digital signage display systems where you want to switch source inputs for screen output on various screens. » Also great for broadcast, multimedia conference, and classroom applications, as well as command and control centers. » Works with Black Box® Mini CAT5 Extenders for transmitting VGA signals over CAT5 cable. » Blinking CHECK light alerts you to any detected system faults. Unit also monitors voltage levels and temperature. » Compact and reliable, with a 2U-high, 19" rackmountable enclosure. » RoHS compliant.
Single Port RJ45 Connector with Magnetics Module and LED
● Designed for Network Interface Card Application ● Meets or Exceeds IEEE802.3 standards including 360uH Min OCL with 8mADC ● High performance for EMI suppression, Crosstalk, Return Loss and Consistent Electrical. ● Minimum 1500Vrms isolation per IEEE802.3 requirement ● Minimize PCB space and Simplify PCB Layout ● Less magnetic components to place on PCB, Higher reliability and yields
Description: 10/100 Base-TX RJ45 single port with LEDs and integrated magnetics – Designed for most leading PHY manufacturers with the addition of Power Feeding over the signal pairs according to IEEE 802.3af
Features and Benefits: ● RoHS-5 peak wave solder temperature rating 235°C ● RoHS-6 peak wave solder temperature rating 260°C ● Single port Connector for PoE applications ● Contains Surge Suppression to protect IC from power spikes