P/N + Description + Content Search

Description/Features
The 40EPS.. RECTIFIER SAFEIR series has been optimized for very low forward voltage drop, with moderate leakage. The glass passivation technology used has reliable operation up to 150° C junction temperature.
Typical applications are in input rectification and these products are designed to be used with International RECTIFIER Switches and Output RECTIFIERs which are available in identical package outlines.

Description/ Features
The 40EPS16PbF RECTIFIER SAFEIR series has been optimized for very low forward voltage drop, with moderate leakage. The glass passivation technology used has reliable operation up to 150° C junction temperature.
Typical applications are in input rectification and these products are designed to be used with International RECTIFIER Switches and Output RECTIFIERs which are available in identical package outlines.

Description
Third International RECTIFIER from International RECTIFIER provide the designer with the best combination of fast switching, ruggedized device design, low on-resistance and cost-effectiveness.

• Dynamic dV/dt Rating
• Repetitive Avalanche Rated
• Fast Switching
• Ease of Paralleling
• Simple Drive Requirements

Description/Features
The 20ETS.. RECTIFIER SAFEIR series has been optimized for very low forward voltage drop, with moderate leakage. The glass passivation technology used has reliable operation up to 150°C junction temperature.
Typical applications are in input rectification and these products are designed to be used with International RECTIFIER Switches and Output RECTIFIERs which are available in identical package outlines.

Description/Features
The 40EPS16 RECTIFIER SAFEIR series has been optimized for very low forward voltage drop, with moderate leakage. The glass passivation technology used has reliable operation up to 150° C junction temperature.
Typical applications are in input rectification and these products are designed to be used with International RECTIFIER Switches and Output RECTIFIERs which are available in identical package outlines.

RECTIFIER Module for POWER Factor Correction

Fast Single Phase RECTIFIER
Ultra Fast Boost Chopper

Features
• high level of integration - only one POWER semiconductor module required for the whole PFC RECTIFIER
• standard PFC control ICs useable
• fast RECTIFIER diodes for enhanced EMC behaviour
• NPT IGBT with low saturation voltage, ultra fast switching capability, high RBSOA and short circuit ruggedness
• internally series connected HiPerFREDTM free wheeling diode for fast and soft reverse recovery at high switching frequency
• package with insulated DCB base and soldering pins for PCB mounting

Application
• single phase rectification with POWER factor correction (PFC)
• low harmonic content of mains current
• mains current and voltage in phase
• wide input voltage range, controlled output voltage

Description/ Features
The 40EPS..PbF RECTIFIER SAFEIR series has been optimized for very low forward voltage drop, with moderate leakage. The glass passivation technology used has reliable operation up to 150° C junction temperature. Typical applications are in input rectification and these products are designed to be used with International RECTIFIER Switches and Output RECTIFIERs which are available in identical package outlines.

SCANSWITCH POWER RECTIFIER
For High and Very High Resolution Monitors

This state−of−the−art POWER RECTIFIER is specifically designed for use as a damper diode in horizontal deflection circuits for high and very high resolution monitors.

• 1200 Volt Blocking Voltage
• 20 mJ Avalanche Energy (Guaranteed)
• 12 Volt (Typical) Peak Transient Overshoot Voltage
• 135 ns (Typical) Forward Recovery Time

DESCRIPTION
Single Schottky RECTIFIER suited to Switched Mode POWER Supplies and high frequency DC to DC converters.
This device is especially intended for use as a RECTIFIER at the secondary of 3.3V SMPS units.

FEATURES AND BENEFITS
■ VERY LOW FORWARD VOLTAGE DROP FOR LESS POWER DISSIPATION AND REDUCED HEATSINK
■ OPTIMIZED CONDUCTION/REVERSE LOSSES TRADE-OFF WHICH MEANS THE HIGHEST EFFICIENCY IN THE APPLICATIONS
■ HIGH POWER SURFACE MOUNT MINIATURE PACKAGE
■ AVALANCHE RATED

Description/ Features
The 20ETS12PbF RECTIFIER SAFEIR series has been optimized for very low forward voltage drop, with moderate leakage. The glass passivation technology used has reliable operation up to 150°C junction temperature.

Typical applications are in input rectification and these products are designed to be used with International RECTIFIER Switches and Output RECTIFIERs which are available in identical package outlines.