datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

P/N + Description + Content Search

Search Word's :
Description : SENSITIVE HALL-EFFECT SWITCHES FOR HIGH-TEMPERATURE OPERATION

FEATURES and BENEFITS
■Superior Temp. Stability for Automotive or Industrial Applications
■4.5 V to 24 V OPERATION … Needs Only An Unregulated Supply
■Open-Collector 25 mA Output … Compatible with Digital Logic
■Reverse Battery Protection
■Activate with Small, Commercially Available Permanent Magnets
■Solid-State Reliability
■Small Size
■Resistant to Physical Stress

Description : LOW CURRENT OPERATION AT 250 uA

• 1N4614-1THRU 1N4627-1 AVAILABLE IN JAN, JANTX, JANTXV AND JANS PER MIL-PRF-19500/435
LOW CURRENT OPERATION AT 250 µA
LOW REVERSE LEAKAGE AND LOW NOISE CHARACTERISTICS
• DOUBLE PLUG CONSTRUCTION
• METALLURGICALLY BONDED

 

Part Name(s) : HL6335G HL6336G
ETC
Unspecified
Description : Circular Beam LOW OPERATION CURRENT

The HL6335/36G are 0.63 um band AlGaInP laser diodes can be operated with LOW OPERATION CURRENT.

 

* Optical output power : 5mW CW

* Visible light power : 635 nm Typ

* LOW OPERATION CURRENT : 25mA Typ

Description : LOW CURRENT OPERATION AT 250 μA

• 1N4614-1THRU 1N4627-1 AVAILABLE IN JAN, JANTX, JANTXV AND JANS PER MIL-PRF-19500/435
LOW CURRENT OPERATION AT 250 µA
LOW REVERSE LEAKAGE AND LOW NOISE CHARACTERISTICS
• DOUBLE PLUG CONSTRUCTION
• METALLURGICALLY BONDED

 

Description : 8-Bit, 250 MSPS, 1.8 V Dual Analog-to-Digital Converter (ADC)

GENERAL DESCRIPTION
The AD9284 is a dual 8-bit, monolithic sampling, analog-to-digital converter (ADC) that supports simultaneous OPERATION and is optimized for LOW cost, LOW power, and ease of use. Each ADC operates at up to a 250 MSPS conversion rate with outstanding dynamic performance.
The ADC requires a single 1.8 V supply and an encode clock for full performance OPERATION. No external reference components are required for many applications. The digital outputs are LVDS compatible.
The AD9284 is available in a Pb-free, 48-lead LFCSP that is specified over the industrial temperature range of −40°C to +85°C.

FEATURES
   Single 1.8 V supply OPERATION
   SNR: 49.3 dBFS at 200 MHz input at 250 MSPS
   SFDR: 65 dBc at 200 MHz input at 250 MSPS
   LOW power: 314 mW at 250 MSPS
   On-chip reference and track-and-hold
   1.2 V p-p analog input range for each channel
   Differential input with 500 MHz bandwidth
   LVDS-compliant digital output
   DNL: ±0.2 LSB
   Serial port control options
      Offset binary, Gray code, or twos complement data format
      Optional clock duty cycle stabilizer
      Built-in selectable digital test pattern generation
   Pin-programmable power-down function
   Available in 48-lead LFCSP
  
APPLICATIONS
   Communications
   Diversity radio systems
   I/Q demodulation systems
   Battery-powered instruments
   Handheld scope meters
   LOW cost digital oscilloscopes
   OTS: video over fiber

Description : 8-Bit, 250 MSPS 3.3 V A/D Converter

GENERAL DESCRIPTION
The AD9480 is an 8-bit, monolithic analog-to-digital converter optimized for high speed and LOW power consumption. Small in size and easy to use, the product operates at a 250 MSPS conversion rate, with excellent linearity and dynamic performance over its full operating range.

FEATURES
    DNL = ± 0.25 LSB
    INL = ± 0.5 LSB
    Single 3.3 V supply OPERATION (3.0 to 3.6 V)
    Power dissipation of 590 mW at 250 MSPS
    1 V p-p analog input range
    Internal 1.0 V reference
    Single-ended or differential analog inputs
    LVDS outputs (ANSI 644 levels)
    Power-down mode
    Clock duty cycle stabilizer
   
APPLICATIONS
    Digital oscilloscopes
    Instrumentation and measurement
    Communications:
        Point-to-point radios
        Predistortion loops

Description : 12-Bit, 170/210/250 MSPS 1.8 V A/D Converter

GENERAL DESCRIPTION
The AD9230 is a 12-bit monolithic sampling analog-to-digital converter optimized for high performance, LOW power, and ease of use. The product operates at up to a 250 MSPS conversion rate and is optimized for outstanding dynamic performance in wideband carrier and broadband systems. All necessary functions, including a track-and-hold (T/H) and voltage reference, are included on the chip to provide a complete signal conversion solution.

FEATURES
   SNR = 64.9 dBFS @ fIN up to 70 MHz @ 250 MSPS
   ENOB of 10.4 @ fIN up to 70 MHz @ 250 MSPS (−1.0 dBFS)
   SFDR = −79 dBc @ fIN up to 70 MHz @ 250 MSPS (−1.0 dBFS)
   Excellent linearity
      DNL = ±0.3 LSB typical
      INL = ±0.5 LSB typical
   LVDS at 250 MSPS (ANSI-644 levels)
   700 MHz full power analog bandwidth
   On-chip reference, no external decoupling required
   Integrated input buffer and track-and-hold
   LOW power dissipation
      434 mW @ 250 MSPS—LVDS SDR mode
      400 mW @ 250 MSPS—LVDS DDR mode
   Programmable input voltage range
      1.0 V to 1.5 V, 1.25 V nominal
   1.8 V analog and digital supply OPERATION
   Selectable output data format (offset binary, twos
   complement, Gray code)
   Clock duty cycle stabilizer
   Integrated data capture clock

APPLICATIONS
   Wireless and wired broadband communications
   Cable reverse path
   Communications test equipment
   Radar and satellite subsystems
   Power amplifier linearization

Elantec
Elantec -> Intersil
Description : 250 MHz Triple CURRENT Feedback Amp w/Disable

General Description
The EL2386C is a triple CURRENT-feedback OPERATIONal amplifier which achieves a b3 dB bandwidth of 250 MHz at a gain of a1 while consuming only 3 mA of supply CURRENT per amplifier. It will operate with dual supplies ranging from g1.5V to g6V, or from single supplies ranging from a3V to a12V. The EL2386C also includes a disable/power-down feature which reduces CURRENT consumption to 0 mA while placing the amplifier output in a high impedance state. In spite of its LOW supply CURRENT, the EL2386C can output 55 mA while swinging to g4V on g5V supplies. These attributes make the EL2386C an excellent choice for LOW power and/or LOW voltage cable-driver, HDSL, or RGB applications.

Features
• Triple amplifier topology
• 3 mA supply CURRENT (per amplifier)
250 MHz b3 dB bandwidth
LOW cost
• Fast disable
• Powers down to 0 mA
• Single- and dual-supply OPERATION down to g1.5V
• 0.05%/0.05§ Diff. gain/Diff. phase into 150X
• 1200V/ms slew rate
• Large output drive CURRENT: 55 mA
• Available in single (EL2186C) and dual (EL2286C) form
• Non-power down versions available in single, dual, and quad (EL2180C, EL2280C, EL2480C)
LOWer power EL2170C/EL2176C family also available (1 mA/70 MHz) in single, dual and quad.

Applications
LOW power/battery applications
• HDSL amplifiers
• Video amplifiers
• Cable drivers
• RGB amplifiers
• Test equipment amplifiers
CURRENT to voltage converters
• Multiplexing
• Video broadcast equipment

Description : COAXIAL, TRIAXIAL, MULTI & MIXED CONNECTORS

[LEMO]

E series connectors have been specifically designed for outdoor applications.
They include an inner sleeve and two seals to prevent penetration of solids or liquids into the housing formed by the plug, free socket or fixed socket. All models of these series are watertight when mated and give a protection index of IP 68 as per IEC 60529 standard (in mated condition) when correctly assembled to an appropriate cable (IP 66 otherwise).

– security of the Push-Pull latching system
– watertight connection (IP 68/IP 66)
– solder contacts, print contacts only for coaxial and triaxial configurations
– coaxial, triaxial and mixed contact configurations
– polarization by stepped insert (half-moon)
– 360° screening for full EMC shielding
– rugged housing for extreme working condition.

Description : LOW CURRENT OPERATION AT 250 µA

• 1N4099-1 THRU 1N4135-1 AVAILABLE IN JAN, JANTX, JANTXV AND JANS PER MIL-PRF-19500/435
LOW CURRENT OPERATION AT 250 µ A
LOW REVERSE LEAKAGE AND LOW NOISE CHARACTERISTICS
• METALLURGICALLY BONDED

12345678910 Next

All Rights Reserved© datasheetbank.com  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]