datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

P/N + Description + Content Search

Search Word's :
Description : IR Receiver Modules for Remote Control Systems

Description
The TSOP41.. – series are miniaturized Receivers for infrared Remote Control Systems. PIN diode and preamplifier are assembled on lead frame, the epoxy package is designed as IR filter.

Features
● Photo detector and preamplifier in one package
● Internal filter for PCM frequency
● Improved shielding against electrical field disturbance
● TTL and CMOS compatibility
● Output active low
● Low power consumption
● High immunity against ambient light
● Enhanced data rate of 2400 bit/s
● Operation with short bursts possible (≥6 cycles/burst)

Description : IR Receiver Modules for Remote Control Systems

Description
The TSOP22..IV1 - series are miniaturized Receivers for infrared Remote Control Systems. PIN diode and preamplifier are assembled on lead frame, the epoxy package is designed as IR filter.
The demodulated output signal can directly be decoded by a microprocessor. TSOP22..IV1 is the standard IR Remote Control Receiver series, supporting all major transmission codes.

Features
• Photo detector and preamplifier in one package
• Internal filter for PCM frequency
• Improved shielding against electrical field disturbance
• TTL and CMOS compatibility
• Output active low
• Low power consumption

Special Features
• Improved immunity against ambient light
• Suitable burst length ≥ 10 cycles/burst

Description : IR Receiver Modules for Remote Control Systems

Description
The TSOP48..ON1 - series are miniaturized Receivers for infrared Remote Control Systems. PIN diode and preamplifier are assembled on lead frame, the epoxy package is designed as IR filter.
The demodulated output signal can directly be decoded by a microprocessor. TSOP48..ON1 is the standard IR Remote Control Receiver series, supporting all major transmission codes.

Features
• Photo detector and preamplifier in one package
• Internal filter for PCM frequency
• Improved shielding against electrical field disturbance
• TTL and CMOS compatibility
• Output active low
• Low power consumption

Special Features
• Improved immunity against ambient light
• Suitable burst length ≥ 10 cycles/burst

Description : IR Receiver Modules for Remote Control Systems

Description

The TSOP344..SB1F - series are miniaturized Receivers for infrared Remote Control Systems. PIN diode and preamplifier are assembled on lead frame, the epoxy package is designed as IR filter. The demodulated output signal can directly be decoded by a microprocessor. TSOP344..SB1F is a standard IR Remote Control Receiver series for 3 V supply voltage with excellent suppression of distur bance signals.



Features

• Photo detector and preamplifier in one package

• Internal filter for PCM frequency

• Improved shielding against electrical field disturbance

• TTL and CMOS compatibility

• Output active low

• Supply voltage range: 2.7 V to 5.5 V

• Improved immunity against ambient light

• Enhanced suppression of disturbance signals by special filtering

 


Description : IR Receiver Modules for Remote Control Systems

Description
The TSOP41..SS1BS12 - series are miniaturized Receivers for infrared Remote Control Systems. PIN diode and preamplifier are assembled on lead frame, the epoxy package is designed as IR filter.
The demodulated output signal can directly be decoded by a microprocessor. The main benefit is the reliable function even in disturbed ambient and the protection against unControlled output pulses.

Features
• Photo detector and preamplifier in one package
• Internal filter for PCM frequency
• Improved shielding against electrical field disturbance
• TTL and CMOS compatibility
• Output active low
• Low power consumption
• High immunity against ambient light

Special Features
• Enhanced data rate of 4000 bit/s
• Operation with short bursts possible (≥ 6 cycles/burst)

Description : IR Receiver Modules for Remote Control Systems

DESCRIPTION
These products are miniaturized SMD-IR Receivers for infrared Remote Control Systems. A PIN diode and a preamplifier are assembled on a lead frame, the epoxy package acts as an IR filter.
The demodulated output signal can be directly connected to a microprocessor. The TSOP62.. is a legacy product for all common IR Remote Control data formats. The TSOP64.. is optimized to suppress almost all spurious pulses from energy saving fluorescent lamps. They may suppress some data signals.
This component has not been qualified according to automotive specifications.

FEATURES
• Low supply current
• Photo detector and preamplifier in one package
• Internal filter for PCM frequency
• Improved shielding against EMI
• Supply voltage: 2.5 V to 5.5 V
• Improved immunity against ambient light
• Insensitive to supply voltage ripple and noise
• Taping available for top view and side view assembly
• Material categorization: for definitions of compliance please see www.vishay.com/doc?99912

Description : IR Receiver Modules for Remote Control Systems

DESCRIPTION
These products are miniaturized Receivers for infrared Remote Control Systems. A PIN diode and a preamplifier are assembled on a lead frame, the epoxy package contains an IR filter. The demodulated output signal can be directly connected to a microprocessor for decoding.

FEATURES
• Improved immunity against HF and RF noise
• Low supply current
• Photo detector and preamplifier in one package
• Internal filter for PCM frequency
• Improved shielding against EMI
• Supply voltage: 2.5 V to 5.5 V
• Suitable for short bursts: burst length ≥ 6 carrier cycles
• Improved immunity against ambient light
• Insensitive to supply voltage ripple and noise
• Material categorization: for definitions of compliance please see www.vishay.com/doc?99912

Description : IR Receiver Modules for Remote Control Systems

Description
The TSOP13..KA1- series are miniaturized Receivers for infrared Remote Control Systems. PIN diode and preamplifier are assembled on lead frame, the epoxy package is designed as IR filter.
The demodulated output signal can directly be decoded by a microprocessor. The main benefit is the reliable function even in disturbed ambient and the protection against unControlled output pulses.

Features
• Photo detector and preamplifier in one package
• Internal filter for PCM frequency
• Improved shielding against electrical field disturbance
• TTL and CMOS compatibility
• Output active low
• Low power consumption
• No occurrence of disturbance pulses at the output

Special Features
• Suitable burst length ≥6 cycles/burst
• Enhanced immunity against all kinds of disturbance light
• Improved immunity against EMI from TV picture tube

Description : IR Receiver Modules for Remote Control Systems

Description
The TSOP41..JH1 - series are miniaturized Receivers for infrared Remote Control Systems. PIN diode and preamplifier are assembled on lead frame, the epoxy package is designed as IR filter.
The demodulated output signal can directly be decoded by a microprocessor. The main benefit is the operation with short burst transmission codes and high data rates.

Features
• Photo detector and preamplifier in one package
• Internal filter for PCM frequency
• Improved shielding against electrical field disturbance
• TTL and CMOS compatibility
• Output active low
• Low power consumption
• High immunity against ambient light

Special Features
• Enhanced data rate of 4000 bit/s
• Operation with short bursts possible (≥ 6 cycles/burst)

Description : IR Receiver Modules for Remote Control Systems

Description

The TSOP344..SS1BS12 - series are miniaturized Receivers for infrared Remote Control Systems. PIN

diode and preamplifier are assembled on lead frame, the epoxy package is designed as IR filter.

The demodulated output signal can directly be decoded by a microprocessor. TSOP344..SS1BS12

is a standard IR Remote Control Receiver series for 3 V supply voltage, with excellent suppression of disturbance signals.



Features

• Photo detector and preamplifier in one package

• Internal filter for PCM frequency

• Improved shielding against electrical field disturbance

• TTL and CMOS compatibility

• Output active low

• Supply voltage: 2.7 V to 5.5 V

• Improved immunity against ambient light


12345678910 Next

All Rights Reserved© datasheetbank.com  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]