datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

P/N + Description + Content Search

Search Word's :
Part Name(s) : T60404-N4646-X300
VACUUMSCHMELZE GmbH & Co. KG
VACUUMSCHMELZE GmbH & Co. KG
Description : 1 – 5 – 8 – 12 – 25 A Current Sensor

Description
• Closed loop (compensation)
   Current Sensor with magnetic
   field probe
• Printed circuit board mounting
• Casing and materials UL-listed

Characteristics
• Excellent accuracy
• Very low offset Current
• Very low temperature dependency and offset
   Current drift
• Very low hysteresis of offset Current
• Short response time
• Wide frequency bandwidth
• Compact design
• Reduced offset ripple

Applications
Mainly used for stationary operation in industrial
applications:
• AC variabel speed drives and servo motor
   drives
• Static converters for for DC motor drives
• Battery supplied applications
• Switched Mode Power Supplies (SMPS)
• Power Supplies for welding applications
• Uninterruptable Power Supllies (UPS)

Description : Low Thermal EMF Reed Relays

Low Thermal EMF Reed Relays
The 3500 Series is ideally suited to the needs of Instrumentation, Data Acquisition and Process Control. The specification tables allow you to select the appropriate relay for your particular application. Recommended for use in high accuracy DVM’s, Multiplexers and Digital or Analog Multipoint Recorders. If your requirements differ from the selection options, please consult Coto’s Factory to discuss a custom reed relay.

3500 Series Features
◆ Low Thermal EMF: < 10 µV through < 0.5 µV with 50 nV stability
◆ Patented Low Thermal Design. U.S. Patent #4,084,142
◆ Low power coils to ensure low thermal EMF
◆ High Insulation Resistance - 1012 Ω
◆ Control/Signal isolation of 1500 VDC
◆ High reliability, hermetically sealed contacts
◆ Form A, Dry or Hg Wet contacts. High Dielectric Strength
◆ Epoxy coated steel shell provides magnetic shielding

Description : MEMORY SPECTRUM

Introduction
APRIL 2004. This edition of Memory Spectrum has been developed to enable you to easily view the entire range of Infineon’s memory products. For more related product information and the latest datasheets, please visit our websites: www.infineon.com/memory and www.infineon.com/memory/flash.

■ DDR400 Components and DIMMs (PC3200)
■ 2 GB DDR2 Unbuffered DIMM
■ 4 GB DDR2 Registered DIMM
■ 16 Mb and 32 Mb CellularRAM
■ 512 Mb Mobile-RAM
■ “Green**”, DRAM Components and Modules
■ 512 Mb and 1 Gb TwinNAND Components
■ SD Cards / MultiMediaCards

Description : Triple Output, High-Effi ciency, Smaller-Package, 25-40 Watt, DC/DC Converters

Murata Power Solutions’ TMP Models are fully potted, 25-40 Watt, triple-output DC/DC converters designed to meet UL 60950-1 and EN60950-1 safety standards. The TMP’s higher effi ciencies and thermally conductive potting compound enable these devices to achieve higher operating temperatures without derating. The 2" x 3" TMP "footprint" conforms to the standard pinout and pin geometries of most 3" x 3" devices (a 33% space savings) while delivering 60% more power (40W vs. 25W).



Applicable to a wide range of telecom, computer and other OEM applications, TMP Model DC/DC’s offer +5V and ±12V or +5V and ±15V outputs. They operate from four different input voltage ranges with total available output power being a function of the selected range. "Q12" models operate from 10-36V and deliver 25W. "Q48" models operate from 18-75V and deliver 30W. For "D24" and "D48" models, the input ranges and output powers are 18-36V at 35W and 36-75V at 40W, respectively.



TMP's employ corrosion-resistant metal cases with plastic headers. Heat-generating ransformer cores and power semiconductors are mounted to the cases, which have threaded inserts for add-on heat sinks. All devices feature input pi fi lters, input overvoltage shutdown, output overvoltage protection, output Current limiting, and thermal shutdown.


Description : High-Efficiency, Smaller-Package 25-40 Watt, DC/DC Converters

DATEL’s TMP Models are fully potted, 25-40 Watt, triple-output DC/DC converters designed to meet UL1950 and EN60950 safety standards. The TMP’s higher efficiencies and thermally conductive potting compound enable these devices to achieve higher operating temperatures without derating. The 2" x 3" TMP "footprint" conforms to the standard pinout and pin geometries of most 3" x 3" devices (a 33% space savings) while delivering 60% more power (40W vs. 25W). O

Features
■ Higher operating temperatures
■ Fully potted
■ Designed to meet UL1950 and EN60950 (basic insulation)
■ CE mark available (75V-input models)
■ Fully isolated, 1500Vdc guaranteed
■ 25/30/35/40W output power
■ Standard pinout! Smaller size!
■ 2" x 3" package fits 3" x 3" footprint
■ +5V and ±12V or +5V and ±15V outputs
■ Four input voltage ranges: 10-36V, 18-36V, 18-75V, 36-75V
■ High efficiencies (to 86%)
■ VOUT trim and on/off control
■ Modifications and customs for OEM’s

Description : High-Efficiency, Smaller-Package 25-40 Watt, DC/DC Converters

High-Efficiency, Smaller-Package 25-40 Watt, DC/DC Converters

DATEL’s TPB Model, 25-40 Watt, triple-output DC/DC power converters bring you efficient "on-board" power processing in a cost-effective smaller package with a standard pinout. The 2" x 3" TPB "footprint" conforms with the industry-standard pinout and pin geometries of most 3" x 3" devices (a 33% space savings) while delivering as much as 60% more power (40W vs. 25W).
Applicable to a wide range of telecom, computer and other OEM applications, TPB Model DC/DC’s operate from four input voltage ranges (10-36V for "Q12" models, 18- 36V for "D24" models, 18-72V for "Q48" models, and 36-72V for "D48" models). Available output voltages are +5 and ±12V or +5 and ±15V.

Features
■ 25/30/35/40W output power
■ Standard pinout! Smaller size!
■ New 2" x 3" package fits 3" x 3" footprint
■ Output voltages: +5V/±12V or +5V/±15V
■ Four input voltage ranges:
   10-36V, 18-36V
   18-72V, 36-72V
■ High efficiencies (to 86%)
■ Fully isolated, 750Vdc guaranteed
■ Thermal shutdown
■ VOUT trim and on/off control
■ Safety approvals pending
■ Modifications and customs for OEMs

Description : Ribbon Cable Interconnect Solutions

Disclaimer
While TE has made every reasonable effort to ensure the accuracy of the information in this catalog, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the informa tion is accurate, correct, reliable or Current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this catalog are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications.


Getting the Information You Need
Our comprehensive on-line RoHS Customer Support Center provides a forum to answer your questions and support your RoHS needs. A RoHS FAQ (Frequently Asked Questions) is available with links to more detailed information. You can also submit RoHS questions and receive a response within 24 hours during a normal work week. The Support Center also provides:
■ Cross-Reference from Non-compliant to Compliant Products
■ Ability to browse RoHS Compliant Products in our on-line catalog
■ Downloadable Technical Data Customer Information Presentation
■ More detailed information regarding the definitions used above
■ So whatever your questions when it comes to RoHS, we have the answers at www.te.com/leadfree

Description : 3A Low Dropout Voltage Regulator

DESCRIPTION
The SPX1587 is a low power positive-voltage regulator designed to satisfy moderate power requirements with a cost effective, small footprint solution. This device is an excellent choice for use in battery-powered applications and portable computers. The SPX1587 features very low quiescent Current and a low dropout voltage of 1.1V at a full load. As output Current decreases, quiescent Current flows into the load, increasing efficiency. SPX1587 is available in adjustable or fixed 1.5V, 1.8V, 2.5V, 3.3V and 5.0V output voltages.
The SPX1587 is offered in several 3-pin surface mount packages: TO-252, TO-220 and TO-263. An output capacitor of 10µF ceramic or tantalum provides unconditional stability.

FEATURES
■ Guaranteed 3A Output Current
■ Three Terminal Adjustable or Fixed 1.5V, 1.8V, 2.5V, 3.3V and 5.0V
■ Low Quiescent Current
■ Low Dropout Voltage: 1.1V at 3A
■ Line Regulation: 0.1%
■ Load Regulation: 0.1%
■ Stable with 10uF Ceramic Capacitor
■ OverCurrent and Thermal Protection
■ Similar to Industry Standard LT1085/LT1585
■ Available in RoHS Compliant, Lead Free
   Packages: TO-252, TO-220, and TO-263

Description : D-SUM IDC

D-SUM IDC

Description : 3-in-1 High-Speed Silicon Delay Line

DESCRIPTION
The DS1135 series is a low-power, +5-volt high-speed version of the popular DS1013 and DS1035. The DS1135 series of delay lines have three independent logic buffered delays in a single package. The device is Dallas Semiconductor’s fastest 3-in-1 delay line. It is available in a standard 8-pin DIP and 150 mil 8-pin Mini-SOIC, as well as an 8-pin, 118 mil uSOP.

FEATURES
● All-silicon timing circuit
● Three independent buffered delays
● Stable and precise over temperature and voltage
● Leading and trailing edge precision preserves the input symmetry
● Standard 8-pin DIP and 8-pin SOIC (150 mil)
● Vapor phasing, IR and wave solderable
● Available in Tape and Reel
● Commercial and industrial temperature ranges available; see order info table
● 5V operation (for 3V operation, see part number DS1135L)
● Recommended replacement for DS1013 and DS1035

12345678910 Next

All Rights Reserved© datasheetbank.com  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]