datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

H1120P53 View Datasheet(PDF) - Unspecified

Part Name
Description
View to exact match
H1120P53 Datasheet PDF : 8 Pages
1 2 3 4 5 6 7 8
T-Handle for SBS®75G
The “T” handle makes mating and unmating the connector easier. The non-conductive
red plastic material is strong and safe. (2) Machine screws and lock nuts.
Description
--- Part Number ---
Minimum Quantity ..............................
50 .........
Red “T” Handle + Hardware Bag
SBS75GHDL-RED
Dust Cover SBS®50
Prevents dust and dirt from entering the mating interface of the
connector when unmated. NOTE: Not a Hermetic Seal.
Description
---- Part Number ----
Minimum Quantity ............................... 500
50 ...
Dust Cover with Lanyard Strap, Red 113890P1 134G1
Shown with the SB®50
Slide cover over
mating end.
Cable Clamps for SBS®50
Durable metal cable clamps securely hold cables to prevent accidental strain or pulls from dislodging
wire or contacts from the housing. Cable clamps are recommended for solder terminated wires. 5905
Cable Size
AWG or
mm² or
Description
(Inches O.D.) (mm O.D.)
----- Part Numbers -----
Minimum Quantity ............................................................................................ 500
50 ...
Self Attaching for Discrete Conductor 8 to 6
10
990-BK
990
Self Attaching for Discrete Conductor 12 to 10
4 to 6
990G2-BK 990G2
Bolt On for Discrete Conductor
12 to 6
4 to 10
990G1-BK 990G1
Bolt On for Bundled Conductor
(0.320 to 0.450) (4.27 to 11.43) 5905-BK 5905
990
Shown with the SB®50
Bolt on bundled
conductors.
The given wire O.D. information is an esti-
mate. Cable clamps should be evaluated for
performance with the actual wire to be used.
Self attaching discrete conductor.
Cable Clamps for SBS®75X with Integral Handle
Rugged chemical resistant PBT/ PC plastic cable clamps securely hold cables to prevent accidental strain or pulls from dislodging
wire or contacts from the housing. Cable clamps are recommended for solder terminated wires.
Cable Size AWG or mm² or
Description
(Inches O.D.)
(mm O.D.)
Minimum Quantity .....................................................................................................
Large Wire Clamp Kit w/ Hardware 12 to 6 (0.39 to 0.60) 4 to 10 (9.9 to 15.2)
Small Wire Clamp Kit w/ Hardware 12 to 6 (0.34 to 0.55) 4 to 10 (8.6 to 14.0)
------------------ Part Numbers -------------------
100 25 .....
SBS75XCLP1-BK
SBS75XCLP1
SBS75XCLP2-BK
SBS75XCLP2
[ 21.8 ]
0.86
[ 36.4 ]
1.44
[ 48.3 ]
1.90
[ 55.5 ]
2.18
The given wire O.D. information is
an estimate. Cable clamps should
[
45.9 ]
1.81
be
evaluated
for
performance
with
the actual wire to be used.
Clamp hardware requires phillips or flat blade
screwdriver to assemble.
All Data Subject To Change Without Notice
www.andersonpower.com - 55 -
 

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]