datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

GRM155R70G105KA12D View Datasheet(PDF) - Murata Manufacturing

Part Name
Description
View to exact match
GRM155R70G105KA12D
Murata
Murata Manufacturing Murata
GRM155R70G105KA12D Datasheet PDF : 30 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
No.
Item
9 Adhesive Strength of
Termination
Specification
No removal of the terminations or other defect should occur.
10 Vibration
Appearance No defects or abnormalities.
Capacitance Within the specified initial value.
Q or D.F. Within the specified initial value.
Test Method (Ref. Standard:JIS C 5101, IEC60384)
Solder the capacitor on the test substrate shown in Fig.3.
Applied Force :
5N
Holding Time :
10+/-1
Applied Direction :
In parallel with the test substrate and vertical with the capacitor side
Solder the capacitor on the test substrate shown in Fig.3.
Kind of Vibration :
A simple harmonic motion 10Hz to 55Hz to 10Hz
Vibration Time :
1min
Total Amplitude :
1.5mm
This motion should be applied for a period of 2hours in each 3 mutually perpendicular directions(total of 6hours).
11 Substrate
Bending Test
12 Solderability
13 Resistance
to Soldering
Heat
14 Temperature
Sudden
Change
Appearance No defects or abnormalities.
Capacitance Within +/-10%
Change
Solder the capacitor on the test substrate shown in Fig.1.
Pressurization Method : Shown in Fig.2.
Flexure :
1mm
Holding Time :
5+/-1s
Soldering Method :
Reflow soldering
95% of the terminations is to be soldered evenly and continuously.
Test Method :
Flux :
Preheat :
Solder :
Test Temp. :
Test Time :
Solder bath method
Solution of rosin ethanol 25(mass)%
80to 120℃、10s to 30s
Sn-3.0Ag-0.5Cu(Lead Free Solder)
245+/-5
2+/-0.5s
Appearance No defects or abnormalities.
Capacitance Within +/-7.5%
Change
Q or D.F. Within the specified initial value.
I.R.
Within the specified initial value.
Voltage
Proof
No defects.
Test Method :
Solder :
Solder Temp. :
Test Time :
Preheat Temp. :
Preheat Time :
Pre-treatment :
Post-treatment :
Solder bath method
Sn-3.0Ag-0.5Cu(Lead Free Solder)
270+/-5
10+/-0.5s
120to 150
1min
Perform a heat treatment at 150+0/-10°C for 1hour and then let sit for 24+/-2hours at room temperature, then measure.
Let sit for 24+/-2hours at room temperature, then measure.
Appearance No defects or abnormalities.
Capacitance Within +/-7.5%
Change
Q or D.F. Within the specified initial value.
I.R.
Within the specified initial value.
Voltage
Proof
No defects.
Solder the capacitor on the test substrate shown in Fig.3.
Cycles :
5 cycles
Step
1
2
3
4
Tem perature()
Min.Operating Temp. +0/-3
Reference Temp.
Max.Operating Temp. +3/-0
Reference Temp.
Time (min)
30+/-3
2 to 3
30+/-3
2 to 3
Pre-treatment :
Post-treatment :
Perform a heat treatment at 150+0/-10°C for 1hour and then let sit for 24+/-2hours at room temperature, then measure.
Let sit for 24+/-2hours at room temperature, then measure.
GRM155R70G105KA12-01A
 

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]