datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

GMK316BJ010KL-T View Datasheet(PDF) - TAIYO YUDEN

Part Name
Description
View to exact match
GMK316BJ010KL-T
Taiyo-Yuden
TAIYO YUDEN Taiyo-Yuden
GMK316BJ010KL-T Datasheet PDF : 48 Pages
First Prev 41 42 43 44 45 46 47 48
(2)Examples of good and bad solder application
Item
Not recommended
Lead wire of component
Mixed mounting of SMD and
leaded components
Component placement close to
the chassis
Hand-soldering of leaded
components near mounted
components
Chassis
Solder (for grounding)
Electrode pattern
Lead wire of component
Soldering iron
Horizontal component
placement
Recommended
Solder-resist
Solder-resist
Solder-resist
Solder-resist
◆Pattern configurations (Capacitor layout on PCBs)
1-1. The following is examples of good and bad capacitor layouts ; capacitors shall be located to minimize any
stresses from board warp or deflection.
Items
Not recommended
Recommended
possible mechanical
Deflection of board
Place the product at a right
angle to the direction of the
anticipated mechanical
stress.
1-2. The amount of mechanical stresses given will vary depending on capacitor layout. Please refer to diagram below.
Perforation
E
D
C
A
B
Slit
Magnitude of stress A>B=C>D>E
1-3. When PCB is split, the amount of mechanical stress on the capacitors can vary according to the method used. The following methods
are listed in order from least stressful to most stressful: push-back, slit, V-grooving, and perforation. Thus, please consider the PCB,
split methods as well as chip location.
3. Mounting
Precautions
◆Adjustment of mounting machine
1. When capacitors are mounted on PCB, excessive impact load shall not be imposed on them.
2. Maintenance and inspection of mounting machines shall be conducted periodically.
◆Selection of Adhesives
1. When chips are attached on PCBs with adhesives prior to soldering, it may cause capacitor characteristics degradation unless the
following factors are appropriately checked : size of land patterns, type of adhesive, amount applied, hardening temperature and
hardening period. Therefore, please contact us for further information.
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_prec_e-E02R01
 

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]