datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

U.FL-2LP-088-A View Datasheet(PDF) - HIROSE ELECTRIC

Part Name
Description
View to exact match
U.FL-2LP-088-A Datasheet PDF : 8 Pages
1 2 3 4 5 6 7 8
s Product Specifications
Ratings
Nominal characteristic impedance
Voltage rating
Frequency range
50 ohms
60 V AC (rms)
DC to 6 GHz
Operating temperature range
Operating humidity
-40˚C to +90˚C
90% max.
Item
Specification
Conditions
1. Contact resistance
Center: 20 m ohms max.
Outside: 10 m ohms max.
10 mA max.
2. Insulation resistance
500 M ohms min.
100 V DC
3. Withstanding voltage
No flashover or insulation breakdown.
200 V AC / 1 minute
4. V.S.W.R.*
Part No.
Up to 3GHz
3 to 6GHz
U.FL-LP-040 dia.0.81mm Coaxial Cable Assembly
1.3 Max
1.35 Max
U.FL-LP(V)-040 dia.0.81mm Coaxial Cable Assembly
1.3 Max
1.3 Max
U.FL-LP-066 dia.1.13mm Coaxial Cable Assembly
1.3 Max
1.4 Max
U.FL-LP-066 dia.1.32mm Coaxial Cable Assembly
1.3 Max
1.5 Max
U.FL-LP-062 dia.1mm Coaxial Cable Assembly
1.3 Max
1.3 Max
U.FL-LP-088 dia.1.37mm Coaxial Cable Assembly
1.3 Max
1.4 Max
5. Female contact holding force 0.15 N min.
Measured with a Ø 0.475 pin gauge
6. Durability
Contact resistance
(mating/un-mating,
Center: 25 m ohms max.
30 cycles
with corresponding plug)
Outside: 15 m ohms max.
7. Vibration
Frequency: 10 to 100 Hz, single amplitude of 1.5mm, acceleration
No electrical discontinuity of 1µs min.
of 59m/s2, for 5 cycles in the direction of each of the 3 axis.
8. Shock
No damage, cracks or parts dislocation.
Acceleration of 735 m/s2, 11ms duration, sine half-wave
waveform, 2 cycles in each of 3 axes.
9. Humidity
No damage, cracks or parts dislocation.
(Steady state)
Insulation resistance 100 M ohms min.(when humidity high) 96 hours at temperature of 40ç and humidity of 95%.
Insulation resistance 500 M ohms min.(when dry)
10. Temperature cycle
No damage, cracks or parts dislocation.
Temperature:-40˚C/+5 to +35˚C/+90˚C/+5 to +35˚C
Contact resistance:25 m ohms max. (Center)
Time:
30 / 5 max. /30 /5 max.(Minutes)
15 m ohms max. (Outside)
5 cycles
11. Salt spray test
No excessive corrosion
5% salt water solution, 48 hours
*V.S.W.R. Measurement System
The above V.S.W.R. standard values were measured using the measurement system of the diagram below.
sMaterials
Part
Shell
Male center contact
Female center contact
Insulator
Note 1: Cable type connectors were measured with SMA conversion adapters
attached to both ends of the harness product of a suitable 100cm cable.
Note 2: Board type connectors were mounted to a 50glass epoxy board and
measurements were conducted with SMA conversion adapters attached.
Material
Phosphor bronze
Brass
Phosphor bronze
Plug
PBT
Receptacle
LCP
Finish
Silver plating
Gold plating
Gold plating
Color: Black
Color: Beige
Remarks
—————
—————
—————
UL94V-0
UL94V-0
2
 

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]