datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

E-TDA7406 View Datasheet(PDF) - STMicroelectronics

Part Name
Description
View to exact match
E-TDA7406
ST-Microelectronics
STMicroelectronics ST-Microelectronics
E-TDA7406 Datasheet PDF : 64 Pages
First Prev 11 12 13 14 15 16 17 18 19 20 Next Last
Description of the audioprocessor part
TDA7406
4.4
Soft Mute
The digitally controlled Soft Mute stage allows signal muting/demutingwith a programmable
slope. The Mute time is selectable among 4 values: 0.48, 0.96, 123 and 324ms. The mute
process can either be activated by the Soft Mute pin or via the I2C-bus. This slope is realized
in a special S-shaped curve to mute slow in the critical regions (see Figure 7).
For timing purposes the I2C-bus output register (Bit0 = SM read bit) is set to 1 from the start
of muting until the end of de-muting.
Figure 7. Soft Mute-Timing
Note:
4.5
4.5.1
4.5.2
Please notice that a started Mute-action is always terminated and could not be interrupted
by a change of the mute -signal.
Volume Control
Gain/Attenuation Control
The volume control can range from a gain of 32dB up to an attenuation of 79dB; however it
is not recommended to use a gain higher than 20dB for performance reasons.
Soft Step Volume
When the speaker-level is changed, audible clicks could appear at the output. The root
cause of those clicks could either be a DC offset before the speaker-stage or the sudden
change of the envelope of the audio signal. With the SoftStep-feature both kinds of clicks
could be reduced to a minimum and are no more audible. The blend-time from one step to
the next is programmable with four different values: 320μs, 1.28ms, 5.12ms and 20.4ms.
20/64
 

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]