datasheetbank_Logo     データシート検索エンジンとフリーデータシート

HLMP-RD11-J0000_06 データシートの表示(PDF) - Avago Technologies

部品番号コンポーネント説明メーカー
HLMP-RD11-J0000_06 4 mm Oval Precision Optical Performance Best Value AlInGaP and InGaN Lamps AVAGO
Avago Technologies AVAGO
HLMP-RD11-J0000_06 Datasheet PDF : 7 Pages
1 2 3 4 5 6 7
Absolute Maximum Ratings at TA = 25˚C
Parameter
DC Forward Current[1]
Peak Pulsed Forward Current
Average Forward Current
Reverse Voltage (IR = 100 µA)
Power Dissipation
LED Junction Temperature
Operating Temperature Range
Storage Temperature Range
Wave Soldering Temperature
Note:
1. Derate linearly as shown in Figure 6 and 7.
Blue and Green
30 mA
100 mA
30 mA
5V
120 mW
100˚C
–40˚C to +80˚C
–40˚C to +100˚C
250˚C for 3 sec.
Red and Amber
50 mA
100 mA
30 mA
5V
120 mW
110˚C
–40˚C to +100˚C
–40˚C to +120˚C
250˚C for 3 sec.
Electrical/Optical Characteristics at TA = 25˚C
Parameter
Symbol Min.
Typical Viewing Angle
Major
2θ1/2
Minor
Forward Voltage
VF
Amber (λd = 592 nm)
Red (λd = 630 nm)
Blue (λd = 472 nm)
Green (λd = 526 nm)
Reverse Voltage
Amber, Red
Blue, Green
VR
5
5
Peak Wavelength
Amber (λd = 592 nm)
Red (λd = 630 nm)
Blue (λd = 472 nm)
Green (λd = 526 nm)
λpeak
Spectral Halfwidth
Amber (λd = 592 nm)
Red (λd = 630 nm)
Blue (λd = 472 nm)
Green (λd = 526 nm)
Capacitance
Amber, Red
Blue, Green
∆λ1/2
C
Luminous Efficacy
Amber (λd = 592 nm)
Red (λd = 630 nm)
Blue (λd = 472 nm)
Green (λd = 526 nm)
Thermal Resistance
ηv
RθJ-PIN
Typ. Max. Units Test Conditions
120
deg
60
2.15
2.5
V
2.00
2.5
3.5
4.0
3.5
4.0
IF = 20 mA
20
V
IR = 100 µA
IR = 10 µA
Peak of Wavelength
594
nm
of Spectral Distribution
639
at IF = 20 mA
470
524
Wavelength Width
17
nm
at Spectral Distribution
17
1/2 Power Point at
35
IF = 20 mA
47
VF = 0, F = 1 MHz
40
pF
43
Emitted Luminous
500
lm/W Power/Emitted Radiant
155
Power at IF = 20 mA
75
520
240
˚C/W LED Junction-to-Cathode
Lead
Notes:
1. 2θ1/2 is the off-axis angle where the luminous intensity is 1/2 the on-axis intensity.
2. The radiant intensity, Ie in watts per steradian, may be found from the equation Ie = Iv/ηv where Iv is the luminous intensity in candelas and ηv is
the luminous efficacy in lumens/watt.
3. The luminous intensity is measured on the mechanical axis of the lamp package.
4. The optical axis is closely aligned with the package mechanical axis.
5. The dominant wavelength λd is derived from the CIE Chromaticity Diagram and represents the color of the lamp.
3
Direct download click here

 

Share Link : 

All Rights Reserved © datasheetbank.com 2014 - 2020 [ 個人情報 保護方針 ] [ リクエストデータシート ]