datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

HCPL-0300-300 View Datasheet(PDF) - HP => Agilent Technologies

Part Name
Description
View to exact match
HCPL-0300-300
HP
HP => Agilent Technologies HP
HCPL-0300-300 Datasheet PDF : 12 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
2
characteristics enable this device
to be used in an RS-232-C inter-
face with ground loop isolation
and improved common mode
rejection. As a line receiver, the
HCPL-2300/HCPL-0300 will
operate over longer line lengths
for a given data rate because of
lower IF and VF specifications.
The output of the shielded inte-
grated detector circuit is an open
collector Schottky clamped tran-
sistor. The shield, which shunts
capacitively coupled common
mode noise to ground, provides a
guaranteed transient immunity
specification of 100 V/µs. The
output circuit includes an
optional integrated 1000 pull-
up resistor for the open collector.
This gives designers the flexibility
to use the internal resistor for
pull-up to five volt logic or to use
an external resistor for connec-
tion to supply voltages up to 18 V
(CMOS logic voltage).
The Electrical and Switching
Characteristics of the
HCPL-2300/HCPL-0300 are
guaranteed over a temperature
range of -40°C to 85°C. This
enables the user to confidently
design a circuit which will
operate under a broad range of
operating conditions.
Ordering Information
Specify part number followed by Option Number (if desired).
HCPL-2300# XXXX
060 = IEC/EN/DIN EN 60747-5-2 VIORM = 630 V peak Option
300 = Gull Wing Surface Mount Lead Option
500 = Tape/Reel Package Option (1 K min)
XXXE = Lead Free Option
Option data sheets available. Contact your Agilent sales representative or authorized distributor for
information.
Remarks: The notation “#” is used for existing products, while (new) products launched since 15th July
2001 and lead free option will use “-”
Package Outline Drawings
Small Outline SO-8
Package HCPL-0300
8
3.937 ± 0.127
(0.155 ± 0.005)
PIN ONE 1
0.406 ± 0.076
(0.016 ± 0.003)
765
XXX
YWW
234
5.994 ± 0.203
(0.236 ± 0.008)
TYPE NUMBER
(LAST 3 DIGITS)
DATE CODE
1.270 BSC
(0.050)
LAND PATTERN RECOMMENDATION
7.49 (0.295)
1.9 (0.075)
0.64 (0.025)
* 5.080 ± 0.127
(0.200 ± 0.005)
7°
45°
X
0.432
(0.017)
3.175 ± 0.127
(0.125 ± 0.005)
1.524
(0.060)
0 ~ 7°
0.228 ± 0.025
(0.009 ± 0.001)
* TOTAL PACKAGE LENGTH (INCLUSIVE OF MOLD FLASH)
5.207 ± 0.254 (0.205 ± 0.010)
DIMENSIONS IN MILLIMETERS (INCHES).
LEAD COPLANARITY = 0.10 mm (0.004 INCHES) MAX.
0.203 ± 0.102
(0.008 ± 0.004)
0.305 MIN.
(0.012)
NOTE: FLOATING LEAD PROTRUSION IS 0.15 mm (6 mils) MAX.
 

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]