datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

BD48E60G-TR View Datasheet(PDF) - ROHM Semiconductor

Part Name
Description
View to exact match
BD48E60G-TR
ROHM
ROHM Semiconductor ROHM
BD48E60G-TR Datasheet PDF : 10 Pages
1 2 3 4 5 6 7 8 9 10
BD48□□G, BD48□□FVE, BD49□□G, BD49□□FVE series
Technical Note
Circuit Applications
1) Examples of a common power supply detection reset circuit.
VDD1
VDD2
Application examples of BD48□□G/FVE series (Open
Drain output type) and BD49□□G/FVE series (CMOS
RL
output type) are shown below.
BD48□□□
Microcontroller
CL
Noise-filtering
Capacitor
Fig.15 Open Collector Output Type
GND
VDD1
CASE1: the power supply of the microcontroller (VDD2)
differs from the power supply of the reset detection
(VDD1).
Use the open drain output type (BD48□□G/FVE) attached
a load resistance (RL) between the output and VDD2. (As
shown Fig.15)
CASE2: the power supply of the microcontroller (VDD1) is
same as the power supply of the reset detection (VDD1).
Use CMOS output type (BD49□□G/FVE) or open drain
output type (BD48□□G/FVE) attached a load resistance
(RL) between the output and Vdd1. (As shown Fig.16)
GND
BD49□□□
Microcontroller
CL
(Noise-filtering
Capacitor
Fig.16 CMOS Output Type
When a capacitance CL for noise filtering is connected to
the VOUT pin (the reset signal input terminal of the
microcontroller), please take into account the waveform of
the rise and fall of the output voltage (VOUT).
2) The following is an example of a circuit application in which an OR connection between two types of detection voltages
resets the microcontroller.
VDD1
VDD2
VDD3
BD48□□□
BD48□□□
RL
Microcontroller
RST
Fig.17
GND
When there are many power supplies of the system, power supplies VDD1 and VDD2 are being monitored separately, and
it is necessary to reset the microcomputer, it is possible to use an OR connection on the open drain output type
BD48□□G/FVE series to pull-up to the desired voltage (VDD3) as shown in Fig.17 and make the output “High” voltage
matches the power supply voltage VDD3 of the microcontroller.
www.rohm.com
6/9
© 2009 ROHM Co., Ltd. All rights reserved.
2009.04 - Rev.A
 

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]