datasheetbank_Logo    数据手册搜索引擎和 Datasheet免费下载 PDF
零件编号  

24WC01 查看數據表(PDF) - Catalyst Semiconductor => Onsemi

零件编号产品描述 (功能)生产厂家
24WC01 1K/2K/4K/8K/16K-Bit Serial E2PROM Catalyst
Catalyst Semiconductor => Onsemi Catalyst
24WC01 Datasheet PDF : 9 Pages
1 2 3 4 5 6 7 8 9
CAT24WC01/02/04/08/16
clock out data. After the CAT24WC01/02/04/08/16 re-
ceives its slave address information (with the R/W bit set
to one), it issues an acknowledge, then transmits the 8-
bit byte requested. The master device does not send an
acknowledge but will generate a STOP condition.
Selective Read
Selective READ operations allow the Master device to
select at random any memory location for a READ
operation. The Master device first performs a ‘dummy’
write operation by sending the START condition, slave
address and byte address of the location it wishes to
read. After the CAT24WC01/02/04/08/16 acknowledge
the word address, the Master device resends the START
condition and the slave address, this time with the R/W
bit set to one. The CAT24WC01/02/04/08/16 then re-
sponds with its acknowledge and sends the 8-bit byte
requested. The master device does not send an ac-
knowledge but will generate a STOP condition.
Figure 8. Immediate Address Read Timing
Sequential Read
The Sequential READ operation can be initiated by
either the immediate Address READ or Selective READ
operations. After the 24WC01/02/04/08/16 sends initial
8-bit byte requested, the Master will respond with an
acknowledge which tells the device it requires more
data. The CAT24WC01/02/04/08/16 will continue to
output an 8-bit byte for each acknowledge sent by the
Master. The operation is terminated when the Master
fails to respond with an acknowledge, thus sending the
STOP condition.
The data being transmitted from the CAT24WC01/02/
04/08/16 is outputted sequentially with data from ad-
dress N followed by data from address N+1. The READ
operation address counter increments all of the
CAT24WC01/02/04/08/16 address bits so that the en-
tire memory array can be read during one operation. If
more than the E (where E = 127 for 24WC01, 255 for
24WC02, 511 for 24WC04, 1023 for 24WC08, and 2047
for 24WC16) bytes are read out, the counter will “wrap
around” and continue to clock out data bytes.
S
T
S
BUS ACTIVITY: A
SLAVE
T
MASTER R ADDRESS
O
T
P
SDA LINE S
P
A
N
C
DATA
O
K
A
C
K
SCL
8
9
SDA
8TH BIT
DATA OUT
NO ACK
STOP
5020 FHD F10
Doc. No. 25051-00 3/98 S-1
8
Direct download click here
 

Share Link : Catalyst
All Rights Reserved © datasheetbank.com 2014 - 2019 [ 隐私政策 ]