datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

JAN1N5344BTR View Datasheet(PDF) - Microsemi Corporation

Part Name
Description
View to exact match
JAN1N5344BTR
Microsemi
Microsemi Corporation Microsemi
JAN1N5344BTR Datasheet PDF : 3 Pages
1 2 3
SCOTTSDALE DIVISION
1N5333B thru 1N5388B
Silicon 5 Watt Zener Diodes
DESCRIPTION
The 1N5333-5388B JEDEC registered series of axial-leaded 5.0 watt
Zeners provides voltage regulation in a selection from 3.3 to 200 volts with
different tolerances as identified by specific suffix letter on the part number.
These plastic encapsulated Zeners have moisture classification of Level 1
with no dry pack required and are also available in various military
equivalent screening levels by adding a prefix identifier as also described in
the Features section. They may be operated at high maximum dc currents
with adequate heat sinking with their comparatively low thermal resistance
design. Microsemi also offers numerous other Zener products to meet
higher and lower power applications.
APPEARANCE
T-18
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
FEATURES
JEDEC registered 1N5333 to 1N5388B
Zener voltage available 3.3V to 200V
Standard voltage tolerances are plus/minus 5%
with B suffix and 10 % with A suffix identification
Tight tolerances available in plus or minus 2% or
1% with C or D suffix respectively
Options for screening in accordance with MIL-
PRF-19500 for JAN, JANTX, JANTXV, and
JANS are available by adding MQ, MX, MV, or
MSP prefixes respectively to part numbers.
Surface mount equivalents available as
SMBJ5333 to SMBJ5388B, or SMBG5333B to
SMBG5388B
APPLICATIONS / BENEFITS
Regulates voltage over a broad operating current and
temperature range
Wide selection from 3.3 to 200 V
Flexible axial-lead mounting terminals
Nonsensitive to ESD per MIL-STD-750 Method 1020
Withstands high surge stresses
Minimal changes of voltage versus current as
specified by voltage regulation (VZ)
High specified maximum current (IZM) when
adequately heat sunk
Moisture classification is Level 1 per IPC/JEDEC J-
STD-020B with no dry pack required
MAXIMUM RATINGS
Power dissipation at 25ºC: 5.0 watts (also see
derating in Figure 1).
Operating and Storage temperature: -65ºC to
+150ºC
Thermal Resistance: 25 ºC/W junction to lead at
3/8 (10 mm) lead length from body, or 85ºC/W
junction to ambient when mounted on FR4 PC
board (1oz Cu) with 4 mm2 copper pads and
track width 1 mm, length 25 mm
Steady-State Power: 5 watts at TL < 25oC 3/8
inch (10 mm) from body, or 1.47 watts at TA =
25ºC when mounted on FR4 PC described for
thermal resistance (also see Figure 1)
Forward voltage @1.0 A: 1.2 volts (maximum)
Solder Temperatures: 260 ºC for 10 s (max)
MECHANICAL AND PACKAGING
CASE: Void-free transfer molded thermosetting
epoxy body meeting UL94V-0
TERMINALS: Leads, tin-lead plated solderable per
MIL-STD-750, method 2026
POLARITY: Cathode indicated by band. Diode to
be operated with the banded end positive with
respect to the opposite end.
MARKING: Part number
TAPE & REEL option: Standard per EIA-296 (add
“TR” suffix to part number)
WEIGHT: 0.7 grams
See package dimensions on last page
Copyright 2003
7-23-2003 REV B
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 1
 

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]