datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

I.MX27 View Datasheet(PDF) - Freescale Semiconductor

Part Name
Description
View to exact match
I.MX27
Freescale
Freescale Semiconductor Freescale
I.MX27 Datasheet PDF : 152 Pages
First Prev 11 12 13 14 15 16 17 18 19 20 Next Last
Functional Description and Application Information
Included in the AUDMUX are two types of interfaces. The internal ports connect to the processor serial
interfaces, and the external ports connect to off-chip audio devices and serial interfaces of other processors.
A desired connectivity is achieved by configuring the appropriate internal and external ports.
The module includes full 6-wire SSI interfaces for asynchronous receive and transmit, as well as a
configurable 4-wire (synchronous) or 6-wire (asynchronous) peripheral interface. The AUDMUX allows
each host interface to be connected to any other host or peripheral interface in a point-to-point or
point-to-multipoint (network mode).
2.3.7 Clock and Reset Module (CRM)
The Clock and Reset Module (CRM) generates clock and reset signals used throughout the
i.MX27/MX27L processor and for external peripherals. It also enables system software to control,
customize, or read the status of the following functions:
• Chip ID
• Multiplexing of I/O signals
• I/O Driving Strength
• I/O Pull Enable Control
• Well-Bias Control
• System boot mode selection
• DPTC Control
2.3.8 CMOS Sensor Interface (CSI)
The CMOS Sensor Interface (CSI) is a logic interface that enables the i.MX27/MX27L processors to
connect directly to external CMOS sensors and CCIR656 video source.
The capabilities of the CSI include the following:
• Configurable interface logic to support popular CMOS sensors in the market
• Support traditional sensor timing interface
• Support CCIR656 video interface, progressive mode for smart sensor, interlace mode for PAL and
NTSC input
• 8-bit input port for YCC, YUV, Bayer, or RGB data
• 32 × 32 FIFO storing image data supporting Core data read and DMA data burst transfer to system
memory
• Full control of 8-bit and 16-bit data to 32-bit FIFO packing
• Direct interface to eMMA-lt Pre-Processing block (PrP) - Not available on the i.MX27L
• Single interrupt source to interrupt controller from maskable sensor interrupt sources: Start of
Frame, End of Frame, Change of Field, FIFO full
• Configurable master clock frequency output to sensor
• Asynchronous input logic design. Sensor master clock can be driven by either the i.MX27/MX27L
processor or by external clock source.
i.MX27 and i.MX27L Data Sheet, Rev. 1.8
12
Freescale Semiconductor
 

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]