datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

RCM1277U-A View Datasheet(PDF) - ROHM Semiconductor

Part Name
Description
View to exact match
RCM1277U-A Datasheet PDF : 7 Pages
1 2 3 4 5 6 7
Liquid crystal displays
!Operation notes
(1) Attention points in handling
Protect the module from strong shocks as they can
cause damage or defective operation.
The polarizing plate on the surface of the module is
soft and can easily be scratched. Wipe away dirt and
dust using an alcohol-based cleanser.
If the liquid crystal panel is damaged and liquid crystal
contacts your clothing or body, wash immediately with
soap and water.
Do not touch the IC lead electrodes or the electrode ter-
minal components.
If the module is to be used for long periods subjected
to direct sunlight, employ a filter to block the ultraviolet
rays.
Do not store the module in areas of high temperature
or high humidity. Do not store the module in locations
exposed to direct sunlight or fluorescent light.
During handling of the module, in order to prevent
damage to the tab, do not bend it more than two times.
(2) Precautions during operation
Do not connect or disconnect the module while the
power supply is turned on.
Input the input signal after the module power supply is
turned on. When turning it off, turn off the input signal
first. Otherwise the IC may be damaged by the latch-
up phenomenon.
(3) Precautions during installation
Be careful to avoid damage from static electricity. A
CMOS-IC is used in the modules circuitry that can be
easily damaged by static electricity.
A protective film is pasted over the front and back of
the module to protect the panel surfaces. When peel-
ing this film off, be sure to peel as slow as possible in
order to minimize the generation of static electricity.
Use of a ion blower or other deionizing device is rec-
ommended.
RCM1277U-A
 

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]