datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

CB35000 View Datasheet(PDF) - STMicroelectronics

Part Name
Description
View to exact match
CB35000
ST-Microelectronics
STMicroelectronics ST-Microelectronics
CB35000 Datasheet PDF : 16 Pages
First Prev 11 12 13 14 15 16
CB35000 SERIES
Table 6 Absolute Maximum Ratings (note1)
Supply Voltage, Vdd
Input or Output Voltage
DC Forward Bias Current, Input or Output
Storage Temperature Ceramic
Storage Temperature Plastic
-0.5 V to +6.0 V
-0.5 V to (Vdd + 0.5V)
-24mA source, +24mA sink
-65 to 150 degrees Centigrade
-40 to 125 degrees Centigrade
Note 1.
Referenced to Vss. Stresses above those listed under “absolute Maximum Ratings” may cause permanent damage to the
device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated
in the operation sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended peri-
ods may affect the device reliability.
Table 7 Recommended DC Operating Conditions
Normal Operating Supply Voltage Vdd (note 1)
Extended Operating Supply Voltage Vdd (notes 1,2)
Operating Ambient Temperature
3.3 V +/- 10% (3.0 V to 3.6 V)
3.3 V + 0.3V/-0.6V (2.7V to 3.6V)
Commercial (note 3)
Industrial (note 3)
Military (note 4)
0 to 70 degrees Centigrade
-40 to +85 degrees Centigrade
-55 to +125 degrees Centigrade
Note 1.
Note 2.
Note 3.
Note 4.
Commercial, Industrial, and Military Conditions
Low Voltage TTL Circuits are NOT functional to specifications below 3.0 Volts
All circuits will operate to full specifications with a Vdd of 3.0V to 3.6V and a junction temperature of -40 to +125 degrees centi-
grade. These junction temperatures are compatible with the Commercial and Industrial Temperature Ranges.
All circuits will be functional from -55 to +150 degrees centigrade junction temperature (military Ambient Temperature Range)
but will not necessary operate to published specifications. Only circuits specified as operational to extended temperature range
may be used when operating to Military temperature conditions.
Table 8 Special Voltages (Vcc) Operating Conditions
FVI (Five Volt Interface) Supply Voltage (notes 1,2)
GTL (Gunning Transistor Logic) Supply Voltage (notes 1, 3)
CTT (Center Tap Terminated) Supply Voltage (notes 1,4)
5.0V +/- 10% (4.5 V to 5.5 V)
1.2V +/- 5% (1.14 V to 1.26 V)
1.5V +/- 10% (1.35 V to 1.65 V)
Note 1.
Note 2.
Note 3.
Note 4.
Commercial, and Industrial Use Only -40 +85 degrees Centigrade
I/O Circuits Only takes Special External Power Distribution and May NOT be mixed with GTL or CTL circuits on any one side of
the die. Only a very limited buffer set is available.
I/O Circuits Only takes Special External Power Distribution and May NOT be mixed with FVI or CTL circuits on any one side of
the die. Only a very limited buffer set is available.
I /O Circuits Only takes Special External Power Distribution and May NOT be mixed with FVI or GTL circuits on any one side of
the die. Only a very limited buffer set is available.
12/16
®
 

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]