datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

M5-128/104-10VC View Datasheet(PDF) - Lattice Semiconductor

Part Name
Description
View to exact match
M5-128/104-10VC
Lattice
Lattice Semiconductor Lattice
M5-128/104-10VC Datasheet PDF : 47 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
MULTIPLE I/O AND DENSITY OPTIONS
The MACH 5 family offers six macrocell densities in a number of I/O options. This allows designers
to choose a device close to their logic density and I/O requirements, thus minimizing costs. For
the same package type, every density has the same pin-out. With proper design considerations, a
design can be moved to a higher or lower density part as required.
IEEE 1149.1 - COMPLIANT BOUNDARY SCAN TESTABILITY
Most MACH 5 devices have boundary scan registers and are compliant to the IEEE 1149.1 standard.
This allows functional testing of the circuit board on which the device is mounted through a serial
scan path that can access all critical logic nodes. Internal registers are linked internally, allowing
test data to be shifted in and loaded directly onto test nodes, or test node data to be captured and
shifted out for verification. In addition, these devices can be linked into a board-level serial scan
path for more complete board-level testing.
IEEE 1149.1 - COMPLIANT IN-SYSTEM PROGRAMMING
Programming devices in-system provides a number of significant benefits including: rapid
prototyping, lower inventory levels, higher quality, and the ability to make in-field modifications.
All MACH 5 devices provide in-system programming (ISP) capability through their IEEE 1149.1-
compliant Boundary Scan Test Access Port. By using the IEEE 1149.1-compliant Boundary Scan
Test Access Port as the communication interface through which ISP is achieved, customers get the
benefit of a standard, well-defined interface.
MACH 5 devices can be programmed across the commercial temperature and voltage range. The
PC-based LatticePRO software facilitates in-system programming of MACH 5 devices. LatticePRO
software takes the JEDEC file output produced by design implementation software, along with
information about the Boundary Scan chain, and creates a set of vectors that are used to drive the
Boundary Scan chain. LatticePRO software can use these vectors to drive a Boundary Scan chain
via the parallel port of a PC. Alternatively, LatticePRO software can output files in formats
understood by common automated test equipment. This equipment can then be used to program
MACH 5 devices during the testing of a circuit board.
PCI COMPLIANT
MACH 5 devices in the -5/-6/-7/-10/-12 speed grades are compliant with the PCI Local Bus
Specification version 2.1, published by the PCI Special Interest Group (SIG). The 5-V devices are
fully PCI-compliant. The 3.3-V devices are mostly compliant but do not meet the PCI condition to
clamp the inputs as they rise above VCC because of their 5-V input tolerant feature. MACH 5
devices provide the speed, drive, density, output enables and I/Os for the most complex PCI
designs.
10
MACH 5 Family
 

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]