P/N + Description + Content Search
ON Semiconductor
Self Protected High Side Driver with Temperature Shutdown and Current Limit
The NCV8460 is a fully protected High−Side Driver that can be used to switch a wide variety of loads, such as bulbs, solenoids and other acuators. The device is internally protected from an overload condition by an active Current Limit and thermal shutdown.
A diagnostic output reports ON and OFF state open load conditions as well as thermal shutdown.
Features
• Short Circuit Protection
• Thermal Shutdown with Automatic Restart
• CMOS (3.3 V / 5 V) compatible control input
• Open Load Detection in On and Off State
• Diagnostic Output
• Undervoltage and Overvoltage Shutdown
• Loss of Ground Protection
• ESD protection
• Slew Rate Control for Low EMI Switching
• Very Low Standby Current
• NCV Prefix for Automotive and Other Applications Requiring
AEC−Q100 Qualified Site and Change Controls
• These are Pb−Free Devices
Typical Applications
• Switch a Variety of Resistive, Inductive and Capacitive Loads
• Can Replace Electromechanical Relays and Discrete Circuits
• Automotive / Industrial
ON Semiconductor
Dual Self-Protected Low-Side Driver with Temperature and Current Limit
NCV8402D is a dual protected Low−Side Smart Discrete device. The protection features include overCurrent, overTemperature, ESD and integrated Drain−to−Gate clamping for overvoltage protection. This device offers protection and issuitable for harsh automotive environments.
Features
•Short−Circuit Protection
•Thermal Shutdown with Automatic Restart
•Overvoltage Protection
•Integrated Clamp for Inductive Switching
•ESD Protection
•dV/dt Robustness
•Analog Drive Capability (Logic Level Input)
•AEC−Q101 Qualified
•NCV Prefix for Automotive and Other Applications Requiring Site and Change Control
•These Devices are Pb−Free and are RoHS Compliant
Typical Applications
•Switch a Variety of Resistive, Inductive and Capacitive Loads
•Can Replace Electromechanical Relays and Discrete Circuits
•Automotive / Industrial
ON Semiconductor
Self Protected High Side Driver with Temperature Shutdown and Current Limit
The NCV8452 is a fully protected High−Side Driver that can be used to switch a wide variety of loads, such as bulbs, solenoids and other activators. The device is internally protected from an overload condition by an active Current Limit and thermal shutdown.
Features
• Short Circuit Protection
• Thermal Shutdown with Automatic Restart
• CMOS (3 V/5 V) Compatible Control Input
• Overvoltage Protection and Shutdown
• Output Voltage Clamp for Inductive Switching
• Under Voltage Shutdown
• Loss of Ground Protection
• ESD Protection
• Reverse Battery Protection (with external resistor)
• Very Low Standby Current
• NCV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q100
Qualified and PPAP Capable
• These are Pb−Free Devices
Typical Applications
• Switch a Variety of Resistive, Inductive and Capacitive Loads
• Can Replace Electromechanical Relays and Discrete Circuits
• Automotive / Industrial
ON Semiconductor
Self-Protected High Side Driver with Temperature and Current Limit
The NCV8450 is a fully protected High−Side Smart Discrete device with a typical RDS(on) of 1.0 and an internal Current Limit of 0.8 A typical. The device can switch a wide variety of resistive, inductive, and capacitive loads.
Features
• Short Circuit Protection
• Thermal Shutdown with Automatic Restart
• Overvoltage Protection
• Integrated Clamp for Inductive Switching
• Loss of Ground Protection
• ESD Protection
• Slew Rate Control for Low EMI
• Very Low Standby Current
• AEC−Q100/101 qualified
• This is a Pb−Free Device
Typical Applications
• Automotive
• Industrial
ON Semiconductor
The NCV8460A is a fully protected High−Side Driver that can be used to switch a wide variety of loads, such as bulbs, solenoids and other acuators. The device is internally protected from an overload condition by an active Current Limit and thermal shutdown.
A diagnostic output reports ON and OFF state open load conditions as well as thermal shutdown.
Features
• Short Circuit Protection
• Thermal Shutdown with Automatic Restart
• CMOS (3.3 V / 5 V) compatible control input
• Open Load Detection in On and Off State
• Diagnostic Output
• Undervoltage and Overvoltage Shutdown
• Loss of Ground Protection
• ESD protection
• Slew Rate Control for Low EMI Switching
• Very Low Standby Current
• NCV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC Qualified and PPAP Capable
• These Devices are Pb−Free and are RoHS Compliant
Typical Applications
• Switch a Variety of Resistive, Inductive and Capacitive Loads
• Can Replace Electromechanical Relays and Discrete Circuits
• Automotive / Industrial
ON Semiconductor
Self-Protected Low Side Driver with Temperature and Current Limit
42 V, 14 A, Single N−Channel, SOT−223
NCV8403 is a three terminal protected Low-Side Smart Discrete device. The protection features include overCurrent, overTemperature, ESD and integrated Drain-to-Gate clamping for overvoltage protection. This device offers protection and is suitable for harsh automotive environments.
Features
• Short Circuit Protection
• Thermal Shutdown with Automatic Restart
• Over Voltage Protection
• Integrated Clamp for Inductive Switching
• ESD Protection
• dV/dt Robustness
• Analog Drive Capability (Logic Level Input)
• RoHs Compliant
• AEC-Q101 Qualified
• NCV Prefix for Automotive and Other Applications Requiring Site
and Change Control
• These are Pb−Free Devices
Typical Applications
• Switch a Variety of Resistive, Inductive and Capacitive Loads
• Can Replace Electromechanical Relays and Discrete Circuits
• Automotive / Industrial
ON Semiconductor
Self−Protected FET with Temperature and Current Limit
40 V, 6.5 A, Single N−Channel, DPAK
Self–protected FETs are a series of power MOSFETs which utilize ON Semiconductor HDPlus technology. The self–protected MOSFET incorporates protection features such as integrated thermal and Current Limits. The self−protected MOSFETs include an integrated Drain−to−Gate Clamp that provides overvoltage protection from transients and avalanche. The device is protected from Electrostatic Discharge (ESD) by utilizing an integrated Gate−to−Source Clamp.
Features
• Short Circuit Protection
• In Rush Current Limit
• Thermal Shutdown with Automatic Restart
• Avalanche Rated
• Overvoltage Protection
• ESD Protection (4 kV HBM)
• Controlled Slew Rate for Low Noise Switching
• AEC Q101 Qualified
• This is a Pb−Free Device
Applications
• Solenoid Driver
• Relay Driver
• Small Motors
• Lighting
• Relay Replacement
• Load Switching
ON Semiconductor
NCV8402/A is a three terminal protected Low−Side Smart Discrete device. The protection features include overCurrent, overTemperature, ESD and integrated Drain−to−Gate clamping for overvoltage protection. This device offers protection and is suitable for harsh automotive environments.
Features
• Short−Circuit Protection
• Thermal Shutdown with Automatic Restart
• Overvoltage Protection
• Integrated Clamp for Inductive Switching
• ESD Protection
• dV/dt Robustness
• Analog Drive Capability (Logic Level Input)
• NCV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q101
Qualified and PPAP Capable
• These Devices are Pb−Free and are RoHS Compliant
Typical Applications
• Switch a Variety of Resistive, Inductive and Capacitive Loads
• Can Replace Electromechanical Relays and Discrete Circuits
• Automotive / Industrial
ON Semiconductor
NCV8405/A is a three terminal protected Low−Side Smart Discrete device. The protection features include overCurrent, overTemperature, ESD and integrated Drain−to−Gate clamping for overvoltage protection. This device is suitable for harsh automotive environments.
Features
• Short−Circuit Protection
• Thermal Shutdown with Automatic Restart
• Overvoltage Protection
• Integrated Clamp for Inductive Switching
• ESD Protection
• dV/dt Robustness
• Analog Drive Capability (Logic Level Input)
• NCV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q100
Qualified and PPAP Capable
• These Devices are Pb−Free and are RoHS Compliant
Typical Applications
• Switch a Variety of Resistive, Inductive and Capacitive Loads
• Can Replace Electromechanical Relays and Discrete Circuits
• Automotive / Industrial
ON Semiconductor
NCV8401 is a three terminal protected Low-Side Smart Discrete device. The protection features include overCurrent, overTemperature, ESD and integrated Drain-to-Gate clamping for overvoltage protection. This device offers protection and is suitable for harsh automotive environments.
Features
• Short Circuit Protection
• Thermal Shutdown with Automatic Restart
• Over Voltage Protection
• Integrated Clamp for Inductive Switching
• ESD Protection
• dV/dt Robustness
• Analog Drive Capability (Logic Level Input)
• RoHs Compliant
• AEC-Q101 Qualified
• NCV Prefix for Automotive and Other Applications Requiring Site and Change Control
• This is a Pb−Free Device
Typical Applications
• Switch a Variety of Resistive, Inductive and Capacitive Loads
• Can Replace Electromechanical Relays and Discrete Circuits
• Automotive / Industrial
|
|