P/N + Description + Content Search
Hitachi -> Renesas Electronics
Description
The HD74AC126/HD74ACT126 is an Quad buffer and line driver designed to be employed as a memory address driver, clock driver and bus oriented transmitter/receiver which provides improved PC board density.
Features
• 3-state Outputs Drive Bus Lines or Buffer Memory Address Registers
• Outputs Source/Sink 24 mA
• HD74ACT126 has TTL-Compatible Inputs
Renesas Electronics
Description
The HD74AC126/HD74ACT126 is an Quad buffer and line driver designed to be employed as a memory address driver, clock driver and bus oriented transmitter/receiver which provides improved PC board density.
Features
• 3-state Outputs Drive Bus Lines or Buffer Memory Address Registers
• Outputs Source/Sink 24 mA
• HD74ACT126 has TTL-Compatible Inputs
Hitachi -> Renesas Electronics
Description
The HD74AC125/HD74ACT125 is an Quad buffer and line driver designed to be employed as a memory address driver, clock driver and bus oriented transmitter/receiver which provides improved PC board density.
Features
• 3-state Outputs Drive Bus Lines or Buffer Memory Address Registers
• Outputs Source/Sink 24 mA
• HD74ACT125 has TTL-Compatible Inputs
Renesas Electronics
Description
The HD74AC125/HD74ACT125 is an Quad buffer and line driver designed to be employed as a memory address driver, clock driver and bus oriented transmitter/receiver which provides improved PC board density.
Features
• 3-state Outputs Drive Bus Lines orBuffer Memory Address Registers
• Outputs Source/Sink 24 mA
• HD74ACT125 has TTL-Compatible Inputs
ON Semiconductor
Octal buffer/line driver with 3-state Outputs
The MC74AC241/74ACT241 is an octal buffer and line driver designed to be employed as a memory address driver, clock driver and bus oriented transmitter or receiver which provides improved PC board density.
• 3-state Outputs Drive Bus Lines or Buffer Memory Address Registers
• Outputs Source/Sink 24 mA
• ′ACT241 Has TTL Compatible Inputs
Integral Corp.
OCTAL 3-state INVERTING buffer/line driver/LINE RECEIVER High-Performance Silicon-Gate CMOS
The IN74HC240A is identical in pinout to the LS/ALS240. The device inputs are compatible with standard CMOS outputs; with pullup resistors, they are compatible with LS/ALSTTL outputs.
This octal inverting buffer/line driver/line receiver is designed to be used with 3-state memory address drivers, clock drivers, and other bus-oriented systems. The device has inverting outputs and two active-low output enables.
• Outputs Directly Interface to CMOS, NMOS, and TTL
• Operating Voltage Range: 2.0 to 6.0 V
• Low Input Current: 1.0 µA
• High Noise Immunity Characteristic of CMOS Devices
IK Semicon Co., Ltd
Octal 3-state Inverting buffer/line driver/Line Receiver High-Performance Silicon-Gate CMOS
The IN74HC240A is identical in pinout to the LS/ALS240. The device inputs are compatible with standard CMOS outputs; with pullup resistors, they are compatible with LS/ALSTTL outputs.
This octal inverting buffer/line driver/line receiver is designed to be used with 3-state memory address drivers, clock drivers, and other bus oriented systems. The device has inverting outputs and two active-low output enables.
• Outputs Directly Interface to CMOS, NMOS, and TTL
• Operating Voltage Range: 2.0 to 6.0 V
• Low Input Current: 1.0 µA
• High Noise Immunity Characteristic of CMOS Devices
Integral Corp.
Octal 3-state Noninverting buffer/line driver/Line Receiver
High-Performance Silicon -Gate CMOS
The IN74HCT244A is identical in pinout to the LS/ALS244. The device may be used as a level converter for interfacing TTL or NMOS outputs to High-Speed CMOS inputs.
The IN74HCT244A is an octal noninverting buffer/line driver/line recei ver designed to be used with 3-state memory address drivers, clock drivers, and other bus-oriented systems. The device has non-inverted
outputs and two active-low output enables.
· TTL/NMOS-Compatible Input Levels
· Outputs Directly Interface to CMOS, NMOS, and TTL
· Operating Voltage Range: 4.5 to 5.5 V
· Low Input Current: 1.0 mA
Nexperia B.V. All rights reserved
General description
The 74ALVC125 is a Quad non-inverting buffer/line driver with 3-state outputs. The 3-state outputs (nY) are controlled by the output enable input (nOE). A HIGH on the nOE pin causes the outputs to assume a high-impedance OFF-state.
Features
■ Wide supply voltage range from 1.65 V to 3.6 V
■ 3.6 V tolerant inputs/outputs
■ CMOS low power consumption
■ Direct interface with TTL levels (2.7 V to 3.6 V)
■ Power-down mode
■ Latch-up performance exceeds 250 mA
■ Complies with JEDEC standards:
◆ JESD8-7 (1.65 V to 1.95 V)
◆ JESD8-5 (2.3 V to 2.7 V)
◆ JESD8B/JESD36 (2.7 V to 3.6 V)
■ ESD protection:
◆ HBM JESD22-A114E exceeds 2000 V
◆ MM JESD22-A 115-A exceeds 200 V
Integral Corp.
Octal 3-state Noninverting buffer/line driver/Line Receiver
High-Performance Silicon-Gate CMOS
The IN74HCT244A is identical in pinout to the LS/ALS244. The device may be used as a level converter for interfacing TTL or NMOS outputs to High-Speed CMOS inputs.
The IN74HCT244A is an octal noninverting buffer/line driver/line receiver designed to be used with 3-state memory address drivers, clock drivers, and other bus-oriented systems. The device has non-inverted outputs and two active-low output enables.
• TTL/NMOS-Compatible Input Levels
• Outputs Directly Interface to CMOS, NMOS, and TTL
• Operating Voltage Range: 4.5 to 5.5 V
• Low Input Current: 1.0 μA
|
|