P/N + Description + Content Search

Dual High Output Current, Low Power, Low Noise Bipolar Operational Amplifier

The MC33076 Operational Amplifier employs Bipolar technology with innovative High performance concepts for audio and industrial applications. This device uses High frequency PNP input transistors to improve frequency response. In addition, the Amplifier provides High Output current drive capability while minimizing the drain current. The all NPN Output stage exhibits no deadband crossover distortion, large Output voltage swing, excellent phase and gain margins, Low open loop High frequency Output impedance and symmetrical source and sink AC frequency performance.
The MC33076 is tested over the automotive temperature range and is available in an 8–pin SOIC package (D suffix) and in both the standard 8 pin DIP and 16–pin DIP packages for High power applications.

• 100 Ω Output Drive Capability
• Large Output Voltage Swing
• Low Total Harmonic Distortion
• High Gain Bandwidth: 7.4 MHz
• High Slew Rate: 2.6 V/µs
• Dual Supply Operation: ±2.0 V to ±18 V
• High Output Current: ISC = 250 mA typ
• Similar Performance to MC33178

Dual High Output Current, Low Power, Low Noise Bipolar Operational Amplifier

The MC33076 Operational Amplifier employs Bipolar technology with innovative High performance concepts for audio and industrial applications. This device uses High frequency PNP input transistors to improve frequency response. In addition, the Amplifier provides High Output current drive capability while minimizing the drain current. The all NPN Output stage exhibits no deadband crossover distortion, large Output voltage swing, excellent phase and gain margins, Low open loop High frequency Output impedance and symmetrical source and sink AC frequency performance.
The MC33076 is tested over the automotive temperature range and is available in an 8−pin SOIC package (D suffix) and in the standard 8 pin DIP package for High power applications.

• 100 Ω Output Drive Capability
• Large Output Voltage Swing
• Low Total Harmonic Distortion
• High Gain Bandwidth: 7.4 MHz
• High Slew Rate: 2.6 V/μs
• Dual Supply Operation: ±2.0 V to ±18 V
• High Output Current: ISC = 250 mA typ
• Similar Performance to MC33178

High Output Current Low Power, Low Noise Operational Amplifiers

 The MC33178/9 series is a family of High quality monolithic Amplifiers employing Bipolar technology with innovative High performance concepts for quality audio and data signal processing applications. This device family incorporates the use of High frequency PNP input transistors to produce Amplifiers exhibiting Low input offset voltage, Noise and distortion. In addition, the Amplifier provides High Output current drive capability while consuming only 420 µA of drain current per Amplifier. The NPN Output stage used, exhibits no deadband crossover distortion, large Output voltage swing, excellent phase and gain margins, Low open–loop High frequency Output impedance, symmetrical source and sink AC frequency performance.
The MC33178/9 family offers both Dual and quad Amplifier versions, tested over the vehicular temperature range, and are available in DIP and SOIC packages.

• 600 Ω Output Drive Capability
• Large Output Voltage Swing
• Low Offset Voltage: 0.15 mV (Mean)
• Low T.C. of Input Offset Voltage: 2.0 µV/°C
• Low Total Harmonic Distortion: 0.0024% (@ 1.0 kHz w/600 Ω Load)
• High Gain Bandwidth: 5.0 MHz
• High Slew Rate: 2.0 V/µs
• Dual Supply Operation: ±2.0 V to ±18 V
• ESD Clamps on the Inputs Increase Ruggedness without Affecting Device Performance

Dual Low-Noise Operational Amplifier (Dual POWER SUPPLY TYPE)

APPLICATIONS
   General-purpose Amplifier in stereo equipment, tape decks, and radio stero cassette recordes; active filiter, servo Amplifiers, Operational circuits in other general electronic equipment.

NJM4585  is  a  Low  Noise  Bipolar  input  Dual  audio Operational Amplifier featuring 3.5nV/√Hz at 1 kHz. The  NJM4585  features  Low  distortion,  High  slew  rate, wide  bandwidth  and  High  open-loop  gain.  In  addition, unity-gain  stable  alLows  voltage-folLower  operation.

These  features  make  NJM4585  ideal  for  audio  pre Amplifier ,  microphone  Amplifier ,  line  Amplifier  and  other audio  applications.  NJM4585  operate  over  a  wide temperature  range  of  -40°C  to  +125°C,  making  this  IC ideal for use in industrial measurement instruments.
The NJM4585 is available in the 8-pin DMP8 packages.

■ GENERAL DESCRIPTION
NJM2737 is a single supply Dual Operational Amplifier with full swing input and Output, operates from 1.8V. Noise characteristic is designed Low as conventional Low Noise Operational Amplifiers, such as NJM5532 and NJM4580. It is suitable for PC audio, portable audio and other Low voltage single supplied audio applications.

■ FEATURES
● Operating Voltage 1.8 to 6.0V
● Low Input Voltage Noise 5nV/√Hz typ.
● Gain Band Width product 3.1MHz typ. at V+=5V,RL=2kΩ
● Slew Rate 0.7V/µs typ. at V+=5V,RL=2kΩ
● Offset Voltage 5mV max
● Input Full-Swing VICM= 0 to 5.0V at V+=5V
● Output Full-Swing VOH ≥ 4.9V/ VOL ≤ 0.15V at V+=5V,RL=20kΩ
● Load Drivability VOH ≥ 4.75V/ VOL ≤ 0.25V at V+=5V,RL=2kΩ
● Bipolar Technology
● Package Outline DIP8,DMP8,SSOP8,TVSP8

Description
The 4556 integrated circuit is a High-gain, High Output current Dual Operational Amplifier capable of driving ±70mA into 150Ω load (±10.5V Output voltage).

DESCRIPTION
The LM833 is a High performance, Low Noise Dual Operational Amplifier. This Amplifier features popular pin-out, superior Noise performance, and superior total harmonic distortion. This Amplifier also features guaranteed Noise performance with substantially Higher gain-bandwidth product and slew rate, which far exceeds that of the 4558 type Amplifier. The specially designed Low Noise input transistors alLow the LM833 to be used in very Low Noise signal processing applications such as audio preAmplifiers and servo error Amplifier.

FEATURES
● Operating Voltage: ±4V~±18V
● Low Total Harmonic Distortion (0.001%typ.)
● Low Noise Voltage
● High Slew Rate (6V/µs typ.)
● Unity Gain Bandwidth (27MHz@f=10kHz)
● Bipolar Technology

■ GENERAL DESCRIPTION
The NJM2122 is an ultra Low Noise Dual Operational Amplifier. The features of ultra Low Noise, Low operating voltage, and Low saturation voltage are suitable for microphone Amplifier of digital audio items such as portable MD,DAT,and others.

■ FEATURES
● Operating Voltage ( ±2.0V~±7.0V )
● Ultra Low Noise Voltage ( 1.5nV/√Hz typ.@ f=1kHz )
● Low Saturation Output Voltage ( 0.3V typ. )
● Bipolar Technology
● Package Outline DIP8,DMP8

The BA15532, BA15532F, and BA15532N are Low-Noise Dual Operational Amplifiers designed especially for applications involving High-grade audio equipment. Since they feature Low Noise, a wide band width, and High power Output, these products can also be used in measuring instruments and control circuits. The folLowing packages are available : 8-pin DIP (BA15532), 8-pin SOP (BA15532F), and 8-pin SIP (BA15532N).

• Features
1) High Output current capacity.
2) High slew rate.
3) Low Noise.