datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

P/N + Description + Content Search

Search Word's :
Description : 400 V, 40 A alternistor triac


Part Name(s) : 2N5809
NJSEMI
New Jersey Semiconductor
Description : triac, V(DRM) = 600 V TO 699.9 V

Description: triac, V(DRM) = 600 V to 699.9 V

Part Name(s) : 2N5446_
NJSEMI
New Jersey Semiconductor
Description : triac, V(DRM) = 600 V TO 699.9 V

Description: triac, V(DRM) = 600 V TO 699.9 V

Part Name(s) : 2N5443_
NJSEMI
New Jersey Semiconductor
Description : triac, V(DRM) = 600 V TO 699.9 V

Description: triac, V(DRM) = 600 V to 699.9 V

Description : alternistor triacs(6 A to 40 A)

General Description
Teccor offers bidirectional alternistors with current ratings from 6 A to 40 A and voltages from 200 V to 1000 V as part of Teccors broad line of thyristors. Teccors alternistor is specifically designed for applications that switch highly inductive loads. A special chip offers the same performance as two thyristors (SCRs) wired inverse parallel (back-to-back), providing better turn-off behavior than a standard triac. An alternistor may be trig gered from a blocking to conduction state for either polarity of applied AC voltage with operating modes in Quadrants I, II,and III.

Features
• RoHS Compliant
• High surge current capability
• Glass-passivated junctions
• 2500 V ac isolation for L, J, and K Packages
• High commutating dv/dt
• High static dv/dt

Description : alternistor triacs (6 A to 40 A)

General Description
Teccor offers bidirectional alternistors with current ratings from 6 A to 40 A and voltages from 200 V to 1000 V as part of Teccors broad line of thyristors. Teccors alternistor is specifically designed for applications that switch highly inductive loads. A special chip offers the same performance as two thyristors (SCRs) wired inverse parallel (back-to-back), providing better turn-off behavior than a standard triac. An alternistor may be triggered from a blocking to conduction state for either polarity of applied AC voltage with operating modes in Quadrants I, II, and III.
This new chip construction provides two electrically separate SCR structures, providing enhanced dv/dt characteristics while retaining the advantages of a single-chip device.

Features
• High surge current capability
• Glass-passivated junctions
• 2500 V ac isolation for L, J, and K Packages
• High commutating dv/dt
• High static dv/dt

Description : alternistor triacs (6 A to 40 A)

General Description
Teccor offers bidirectional alternistors with current ratings from 6 A to 40 A and voltages from 200 V to 1000 V as part of Teccors broad line of thyristors. Teccors alternistor is specifically designed for applications that switch highly inductive loads. A special chip offers the same performance as two thyristors (SCRs) wired inverse parallel (back-to-back), providing better turn-off behavior than a standard triac. An alternistor may be triggered from a blocking to conduction state for either polarity of applied AC voltage with operating modes in Quadrants I, II, and III.
   
Features
• High surge current capability
• Glass-passivated junctions
• 2500 V ac isolation for L, J, and K Packages
• High commutating dv/dt
• High static dv/dt
   

Part Name(s) : CTA24 CTB24
ETC
Unspecified
Description : 24Amp - 400/600/800/1000V - triac

[cynergy3 components]

24Amp - 400/600/800/1000V - triac

■ Suitable for General Purpose AC Switching
■ Altgernistor/No Snubber Versions for Inductive Loads
■ Logic Level Available for Use with Microcontrollers and Low Level Devices
■ IGT Range 35-50 mA (Q1)
■ VDRM/VRMM 400, 600, 800, 1000V

Applications
• Phase Control
• Static Switching
• Light Dimming
• Motor Speed Control
• Kitchen Equipment
• Power Tools
• Solenoid Valve Controls:
   - Dishwashers
   - Washing Machines

Description : Teccor® brand Thyristors 40 Amp alternistor (High Commutation) triacs

Description
40 Amp bi-directional solid state switch series is designed for AC switching and phase control applications such as motor speed and temperature modulation controls, lighting controls, and static switching relays.
alternistor type devices only operate in quadrants I, II, & III and are used in circuits requiring high dv/dt capability.

Features & Benefts
• RoHS Compliant
• Glass – passivated junctions
• Voltage capability up to 1000V
• Surge capability up to 400A
• Electrically isolated
   K & J -Packages are UL
   recognized for 2500Vrms
  
Applications
   Excellent for AC switching and phase control applications
   such as heating, lighting, and motor speed controls.
   Typical applications are AC solid-state switches, industrial
   power tools, exercise equipment, white goods and
   commercial appliances.
   alternistor triacs (no snubber required) are used in
   applications with extremely inductive loads requiring
   highest commutation performance.
   Internally constructed isolated packages are offered for
   ease of heat sinking with highest isolation voltage.

ETC
Unspecified
Description : Contactor, 3 pole, 380 V 400 V 15 kW, 1 N/O, 110 V 50 Hz, 120 V 60 Hz, AC operation, Screw terminals

[EATON]

Contactor, 3 pole, 380 V 400 V 15 kW, 1 N/O, 110 V 50 Hz, 120 V 60 Hz, AC operation, Screw terminals

12345678910 Next

All Rights Reserved© datasheetbank.com  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]