A2V64S40CTP
64M Single Data Rate Synchronous DRAM
Read command to Precharge command interval (same bank)
When the precharge command is executed for the same bank as the read command that preceded it, the minimum interval
between the two commands is one clock. However, since the output buffer then becomes High-Z after the clocks defined by
lHZP, there is a case of interruption to burst read data output will be interrupted, if the precharge command is input during
burst read. To read all data by burst read, the clocks defined by lEP must be assured as an interval from the final data output
to precharge command execution.
www.DataSheet.co.kr
Revision 2.1
Page 25/36
Sep., 2008
Datasheet pdf - http://www.DataSheet4U.net/