datasheetbank_Logo     Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

74ALVC162835 View Datasheet(PDF) - Renesas Electronics

Part NameDescriptionManufacturer
74ALVC162835 18-bit Universal Bus Driver with 3-state Outputs Renesas
Renesas Electronics Renesas
74ALVC162835 Datasheet PDF : 16 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
18-bit Universal Bus Driver with 3-state Outputs
(Previous ADE-205-201E (Z) )
The HD74ALVC162835 is an 18-bit universal bus driver designed for 2.3 V to 3.6 V VCC operation.
Data flow from A to Y is controlled by the output enable (OE). The device operates in the transparent mode
when the latch enable (LE) is high. When LE is low, the A data is latched if the clock (CLK) input is held
at a high or low logic level. If the LE is low, the A data is stored in the latch/flip flop on the low to high
transition of CLK. When OE is high, the outputs are in the high impedance state.
To ensure the high impedance state during power up or power down, OE should be tied to VCC through a
pullup register; the minimum value of the register is determined by the current sinking capability of the
All outputs, which are designed to sink up to 12 mA, include 26 resistors to reduce overshoot and
Meets “PC SDRAM registered DIMM design support document, Rev. 1.2”
VCC = 2.3 V to 3.6 V
Typical VOL ground bounce < 0.8 V (@VCC = 3.3 V, Ta = 25°C)
Typical VOH undershoot > 2.0 V (@VCC = 3.3 V, Ta = 25°C)
High output current ±12 mA (@VCC = 3.0 V)
All outputs have equivalent 26 series resistors, so no external resistors are required
Rev.7.00, Oct.02.2003, page 1 of 15
Direct download click here


Share Link : 

All Rights Reserved © 2014 - 2019 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]