[AKD4712-A]
■ Tab Functions
1. [REG]: Register Map
This tab is for register read and write.
Each bit on the register map is a push-button switch.
Button Down indicates “H” or “1” and the bit name is shown in red (when read-only the name is shown in dark red).
Button Up indicates “L” or “0” and the bit name is shown in blue (when read-only the name is shown in gray)
Grayed out registers are Read-Only registers. They can not be controlled.
The registers which are not defined on the datasheet are indicated as “---”.
Figure 3. [REG] window
<KM111300>
-8-
2012/06