[AKD4712-A]
Use this button to initialize the registers when the device is reset by a hardware reset.
3. [All Write]: Execute write command for all registers displayed.
4. [All Read]: Execute read command for all registers displayed.
5. [Save]: Save current register settings to a file.
6. [Load]: Execute data write from a saved file.
7. [All Reg Write]: [All Reg Write] dialog box pops up.
8. [Data R/W]: [Data R/W] dialog box pops up.
9. [Read]: Read current register settings and display to the Register area (on the right of the main window).
This is different from [All Read] button as it does not reflect to the register map. It only displays the current register
values in hexadecimal numbers.
<KM111300>
-7-
2012/06