[AKD4712-A]
2-2. [Loop Setting]: Loop Dialog
Click the [Loop Setting] button in the Tool tab to open the loop setting dialog shown below.
A write test can be executed.
Figure 7. [Loop] window
[ OK ] Button
[ Cancel ] Button
[ Address ] Box
[ Start Data ] Box
[ End Data ] Box
[ Interval ] Box
[ Step ] Box
[ Mode Select ] Box
: Start loop test.
: Close dialog and finish process.
: Input data write address in hexadecimal numbers.
: Input start data in hexadecimal numbers.
: Input end data in hexadecimal numbers.
: Input data write interval time.
: Input data write step interval.
: Mode select check box.
• Checked: Write in step interval from the start data to the end data and turn back at the end data to
start data.
[Example] Start Data = 00, End Data = 05, Step = 1
Data flow: 00→01→02→03→04→05→05→04→03→02→01→00
• Not Checked: Write in step interval from the start data to the end data and finish write.
[Example] Start Data = 00, End Data = 05, Step = 1
Data flow: 00→01→02→03→04→05
<KM111300>
-12-
2012/06