datasheetbank_Logo   Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site
Part Name :   

SN74AHC1G32DCKR View Datasheet(PDF) - Texas Instruments

Part NameDescriptionManufacturer
SN74AHC1G32DCKR Single 2-Input Positive-OR Gate TI
Texas Instruments TI
SN74AHC1G32DCKR Datasheet PDF : 24 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
www.ti.com
SN74AHC1G32
SCLS317P – MARCH 1996 – REVISED FEBRUARY 2017
9 Application and Implementation
9.1 Application Information
The SN74AHC1G32 is a low-drive CMOS device that can be used for a multitude of bus-interface type
applications where output ringing is a concern. The low drive and slow edge rates will minimize overshoot and
undershoot on the outputs. The inputs can except voltages to 5.5 V at any valid VCC making it ideal for down
translation.
9.2 Typical Application
5V
VCC 3.3 V - 5 V Regulated
0.1 µF
5-V Driver
µC
Figure 4. Specific Application Schematic
9.2.1 Design Requirements
This device uses CMOS technology and has balanced output drive. Take care to avoid bus contention because it
can drive currents that would exceed maximum limits. The high drive will also create fast edges into light loads
so routing and load conditions should be considered to prevent ringing.
9.2.2 Detailed Design Procedure
• Recommended input conditions
– Specified high and low levels. See (VIH and VIL) in the Recommended Operating Conditions table.
– Inputs are overvoltage tolerant allowing them to go as high as 5.5 V at any valid VCC
• Recommended output conditions
– Load currents should not exceed 25 mA per output and 50 mA total for the part
– Outputs should not be pulled above VCC
9.2.3 Application Curve
AC
HC
AHC
Figure 5. Switching Characteristics Comparison
Copyright © 1996–2017, Texas Instruments Incorporated
Product Folder Links: SN74AHC1G32
Submit Documentation Feedback
9
Direct download click here
 

Share Link : TI
All Rights Reserved © datasheetbank.com 2014 - 2019 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]