MOSPEC
SINGLE-PHASE BRIDGE RECTIFIER
VOLTAGE RANGE 50 to 1000 Volts
CURRENT
4.0 Ampere
FEATURES
*Glass Passivated chip junction
*High forward surge current capability
*Ideal for printed circuit board
*High temperature soldering guaranteed:
260oc/10 second at 5 lbs. (2.3kg) tension
MECHANICAL DATA
*Case: Transfer molded plastic
*Epoxy: UL94V-O rate flame retardant
*Terminals:Lead Solderable Per MIL-STD-202E
method 208C
*Polarity:As Marking on Body
*Mounting Position: Any
*Weight:0.22 ounce, 6.21 gram
KBL005 THRU KBL10
MAXIMUM RATINGS AND ELECTRICAL CHARATERISTICS
* Rating at 25℃ ambient temperature unless otherwise specified
* Single phase, half wave. 60Hz, resistive or inductive load.
* For capacitive load derate current by 20 %
Characteristic
Symbol KBL005 KBL01 KBL02 KBL04 KBL06 KBL08 KBL10
Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
50
100 200 400 600 800 1000
V
VR
RMS Reverse Voltage
VR(RMS)
35
70 140 280 420 560 700
V
Average Forward Rectified TC=50℃(Note 2)
Output Current , at
TA=50℃(Note 3)
IO(AV)
4.0
3.0
A
Non-Repetitive Peak Surge Current
8.3 ms Single half sine-wave superimposed on IFSM
200
A
rated load ( JEDEC Method)
Forward Voltage (per element) ( IF =2.0 Amp)
VFM
1.0
V
Maximum DC reverse current at rated TA = 25℃
DC blocking voltage per element
TA = 100℃
IR
Rating for Fusing( t<8.3 ms)
I2t
Typical Junction Capacitance per element (Note1) CJ
10
uA
1.0
mA
166
A2s
105
pF
Typical Thermal Resistance (note 3)
Rθ jA
20
k/W
Operating and Storage Temperature Range
TJ , Tstg
-65 to +150
℃
Note: 1 Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C.
2. Unit mounted on 3.0”×3.0”×0.11” thick (7.5×7.5×0.3 cm) AL, plate.
3. P.C. board mount with 0.5”×0.5”(12×12mm) copper pad. 0.375”(9.5 mm)lead length.