datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

EM636165BE-6G View Datasheet(PDF) - Etron Technology

Part Name
Description
View to exact match
EM636165BE-6G
Etron
Etron Technology Etron
EM636165BE-6G Datasheet PDF : 75 Pages
First Prev 11 12 13 14 15 16 17 18 19 20 Next Last
EtronTech
1M x 16 SDRAM
EM636165
Test Mode field (A8~A7)
These two bits are used to enter the test mode and must be programmed to "00" in normal
operation.
A8 A7
Test Mode
0
0
normal mode
0
1
Vendor Use Only
1
X
Vendor Use Only
Single Write Mode (A9)
This bit is used to select the write mode. When the BS bit is "0", the Burst-Read-Burst-
Write mode is selected. When the BS bit is "1", the Burst-Read-Single-Write mode is
selected.
A9
Single Write Mode
0
Burst-Read-Burst-Write
1
Burst-Read-Single-Write
Note: A10 and A11 should stay Lduring mode set cycle.
8 No-Operation command
(RAS# = "H", CAS# = "H", WE# = "H")
The No-Operation command is used to perform a NOP to the SDRAM which is selected (CS#
is Low). This prevents unwanted commands from being registered during idle or wait states.
9 Burst Stop command
(RAS# = "H", CAS# = "H", WE# = "L")
The Burst Stop command is used to terminate either fixed-length or full-page bursts. This
command is only effective in a read/write burst without the auto precharge function. The terminated
read burst ends after a delay equal to the CAS# latency (refer to the following figure). The
termination of a write burst is shown in the following figure.
T0
T1
T2
T3
T4
T5
T6
T7
T8
CLK
COMMAND
READ A
NOP
NOP
NOP
Burst Stop
NOP
NOP
NOP
NOP
CAS# latency=1
tCK1, DQ's
DOUT A0 DOUT A1
DOUT A2 DOUT A3
The burst ends after a delay equal to the CAS# latency.
CAS# latency=2
tCK2, DQ's
DOUT A0 DOUT A1
DOUT A2 DOUT A3
CAS# latency=3
tCK3, DQ's
DOUT A0 DOUT A1
DOUT A2 DOUT A3
Termination of a Burst Read Operation (Burst Length 4, CAS# Latency = 1, 2, 3)
Preliminary
15
Rev. 2.7 Mar. 2006
 

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]