datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

KD1084D2T18R View Datasheet(PDF) - STMicroelectronics

Part Name
Description
View to exact match
KD1084D2T18R Datasheet PDF : 18 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
KD1084
SERIES
5A LOW DROP POSITIVE VOLTAGE
REGULATOR ADJUSTABLE AND FIXED
s TYPICAL DROPOUT 1.3V (AT 5A)
s THREE TERMINAL ADJUSTABLE OR FIXED
OUTPUT VOLTAGE 1.5V, 1.8V, 2.5V, 2.85V,
3.3V, 3.6V, 5V.
s GUARANTEED OUTPUT CURRENT UP TO
5A
s OUPUT TOLERANCE ±1% AT 25°C AND
±2% IN FULL TEMPERATURE RANGE FOR
THE "A" VERSION
s OUPUT TOLERANCE ±2% AT 25°C AND
±3% IN FULL TEMPERATURE RANGE
INTERNAL POWER AND THERMAL LIMIT
s WIDE OPERATING TEMPERATURE RANGE
-40°C TO 125°C
s PACKAGE AVAILABLE : TO-220, D2PAK,
D2PAK/A, DPAK
s PINOUT COMPATIBILITY WITH STANDARD
ADJUSTABLE VREG
DESCRIPTION
The KD1084 is a LOW DROP Voltage Regulator
able to provide up to 5A of Output Current.
Dropout is guaranteed at a maximum of 1.5V at
the maximum output current, decreasing at lower
loads. The KD1084 is pin to pin compatible with
the older 3-terminal adjustable regulators, but has
better performances in term of drop and output
tolerance .
SCHEMATIC DIAGRAM
TO-220
D2PAK
DPAK
D2PAK/A
A 2.85V output version is suitable for SCSI-2
active termination. Unlike PNP regulators, where
a part of the output current is wasted as quiescent
current, the KD1084 quiescent current flows into
the load, so increase efficiency. Only a 10µF
minimum capacitor is need for stability.
The devices are supplied in TO-220, D2PAK,
D2PAK/A and DPAK. On chip trimming allows the
regulator to reach a very tight output voltage
tolerance, within ±1% at 25°C for "A" version and
±2% at 25°C for standard version.
May 2002
1/18
 

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]