datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

93AA66A-E View Datasheet(PDF) - Microchip Technology

Part Name
Description
View to exact match
93AA66A-E
Microchip
Microchip Technology Microchip
93AA66A-E Datasheet PDF : 28 Pages
First Prev 11 12 13 14 15 16 17 18 19 20 Next Last
93AA66A/B/C, 93LC66A/B/C, 93C66A/B/C
2.9 Write All (WRAL)
The Write All (WRAL) instruction will write the entire
memory array with the data specified in the command.
For 93AA66A/B/C and 93LC66A/B/C devices, after the
last data bit is clocked into DI, the falling edge of CS
initiates the self-timed auto-erase and programming
cycle. For 93C66A/B/C devices, the self-timed auto-
erase and programming cycle is initiated by the rising
edge of CLK on the last data bit. Clocking of the CLK
pin is not necessary after the device has entered the
WRAL cycle. The WRAL command does include an
automatic ERAL cycle for the device. Therefore, the
WRAL instruction does not require an ERAL instruction,
but the chip must be in the EWEN status.
The DO pin indicates the Ready/Busy status of the
device if CS is brought high after a minimum of 250 ns
low (TCSL).
Note: Issuing a Start bit and then taking CS low
will clear the Ready/Busy status from DO.
VCC must be 4.5V for proper operation of WRAL.
FIGURE 2-10:
CS
WRAL TIMING FOR 93AA AND 93LC DEVICES
TCSL
CLK
DI
1 0 0 0 1 x ••• x Dx ••• D0
DO
High-Z
VCC must be 4.5V for proper operation of WRAL.
TSV
TCZ
Busy
TWL
Ready
High-Z
FIGURE 2-11:
WRAL TIMING FOR 93C DEVICES
TCSL
CS
CLK
DI
1 0 0 0 1 x ••• x Dx ••• D0
TSV
TCZ
DO
High-Z
Busy Ready
High-Z
TWL
© 2005 Microchip Technology Inc.
DS21795C-page 11
 

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]