R0605300L View Datasheet(PDF) - RF Micro Devices
Part Name
Description
View to exact match
R0605300L Datasheet PDF : 3 Pages
| |||
R0605300L
Nominal Operating Parameters
Parameter
Specification
Unit
Min Typ Max
Condition
General Performance
Power Gain
Slope[1]
Flatness of Frequency Response
Input Return Loss
Output Return Loss
Noise Figure
Total Current Consumption (DC)
Distortion Data 5MHz to 65MHz
V+ = 24V; TMB = 30°C; ZS = ZL = 75Ω
29.5 30.25 30.5 dB f = 5MHz
29.3 30.25
dB f = 65MHz
-0.2
0
0.4 dB f = 5MHz to 65MHz
±0.3 dB f = 5MHz to 65MHz (peak to valley)
-20.0
-20.0
dB
f = 5MHz to 65MHz
dB
4.1 4.3 dB f = 65MHz
125.0 133 140.0 mA
V+ = 24V; TMB = 30°C; ZS = ZL = 75Ω
CTB
XMOD
-64 dBc
-55
dBc 7 ch flat; V0 = 50dBmV[2]
CSO
-68 dBc
1. The slope is defined as the difference between the gain at the start frequency and the gain at the stop frequency.
2. 7 channels, NTSC frequency raster: T7 - T13 (7.0MHz to 43.0MHz), +50dBmV flat output level.
Composite Second Order (CSO) - The CSO parameter (both sum and difference products) is defined by the NCTA.
Composite Triple Beat (CTB) - The CTB parameter is defined by the NCTA.
Cross Modulation (XMOD) - Cross modulation (XMOD) is measured at baseband (selective voltmeter method), referenced to 100% modulation of the
carrier being tested.
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
DS140129
For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice@rfmd.com.
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
2 of 3
|
|
Share Link: 