datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

MC68HC908RF2 View Datasheet(PDF) - Motorola => Freescale

Part Name
Description
View to exact match
MC68HC908RF2
Motorola
Motorola => Freescale Motorola
MC68HC908RF2 Datasheet PDF : 254 Pages
First Prev 51 52 53 54 55 56 57 58 59 60 Next Last
FLASH 2TS Memory
FLASH 2TS Program/Margin Read Operation
The embedded smart programming algorithm uses this step-by-step
sequence to program the data into the FLASH memory. The algorithm
optimizes the time required to program each page. Refer to 4.10
Embedded Program/Erase Routines for information on utilizing
embedded routines.
1. Set the FDIV bits. These bits determine the charge pump
frequency.
2. Set PGM = 1. This configures the memory for program operation
and enables the latching of address and data for programming.
3. Read the FLASH 2TS block protect register (FLBPR).
4. Write data to the one byte being programmed.
5. Set HVEN = 1.
6. Wait for a time, tStep.
7. Set HVEN = 0.
8. Wait for a time, tHVTV.
9. Set MARGIN = 1.
10. Wait for a time, tVTP.
11. Set PGM = 0.
12. Wait for a time, tHVD.
13. Read back data in margin read mode. This read operation is
stretched by eight cycles.
14. Clear the MARGIN bit. If the margin read data is identical to
write data, the program operation is complete; otherwise, jump to
step 2.
NOTE: While these operations must be performed in the order shown, other
unrelated operations may occur between the steps.
The smart programming algorithm guarantees the minimum possible
program time.
MC68HC908RF2 Rev. 1
MOTOROLA
FLASH 2TS Memory
Advance Information
51
 

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]