FP1510SOT89 View Datasheet(PDF) - Filtronic PLC
Part Name
Description
View to exact match
FP1510SOT89 Datasheet PDF : 3 Pages
| |||
Preliminary Data Sheet FP1510SOT89
LOW NOISE, HIGH LINEARITY PACKAGED PHEMT
• ABSOLUTE MAXIMUM RATINGS
Parameter
Drain-Source Voltage
Gate-Source Voltage
Drain-Source Current
Gate Current
RF Input Power
Channel Operating Temperature
Storage Temperature
Total Power Dissipation
Symbol
VDS
VGS
IDS
IG
PIN
TCH
TSTG
PTOT
Test Conditions
TAmbient = 22 ± 3 °C
TAmbient = 22 ± 3 °C
TAmbient = 22 ± 3 °C
TAmbient = 22 ± 3 °C
TAmbient = 22 ± 3 °C
TAmbient = 22 ± 3 °C
—
TAmbient = 22 ± 3 °C
Min Max Units
7
V
-3
V
IDSS
mA
7
mA
220 mW
175
ºC
-65
175
ºC
2.3
W
Notes:
• Operating conditions that exceed the Absolute Maximum Ratings could result in permanent damage to the device.
• Power Dissipation defined as: PTOT ≡ (PDC + PIN) – POUT, where
PDC: DC Bias Power
PIN: RF Input Power
POUT: RF Output Power
• Absolute Maximum Power Dissipation to be de-rated as follows above 25°C:
PTOT= 2.3W – (0.015W/°C) x TPACK
where TPACK = source tab lead temperature.
This PHEMT is susceptible to damage from Electrostatic Discharge. Proper precautions should be used when handling these devices.
• HANDLING PRECAUTIONS
To avoid damage to the devices care should be exercised during handling. Proper Electrostatic
Discharge (ESD) precautions should be observed at all stages of storage, handling, assembly, and
testing. These devices should be treated as Class 1A (0-500 V). Further information on ESD control
measures can be found in MIL-STD-1686 and MIL-HDBK-263.
• APPLICATIONS NOTES & DESIGN DATA
Applications Notes are available from your local Filtronic Sales Representative or directly from the
factory. Complete design data, including S-parameters, noise data, and large-signal models are
available on the Filtronic web site.
Phone: (408) 988-1845
Fax: (408) 970-9950
http:// www.filss.com
Revised: 2/26/02
Email: sales@filss.com
|
|
Share Link: 