C-1021E View Datasheet(PDF) -

Release by

PARALIGHTDCC

1.0 INCH SINGLE DIGIT DISPLAY

C-1021E

REV:A / 2

— STORAGE

1) The Display should be stored at 30℃ or less and 70% RH or less after being shipped from PARA

and the storage life limits are 3 months.

2) PARA Display lead frames are comprised of a stannum plated iron alloy. The silver surface may

be affected by environments which contain corrosive gases and so on. Please avoid conditions

which may cause the Display to corrode, tarnish or discolor. This corrosion or discoloration may

cause difficulty during soldering operations. It is recommended that the Display be used as soon

as possible.

3) Please avoid rapid transitions in ambient temperature, especially, in high humidity environments

where condensation can occur.

— HEAT GENERATION

1) Thermal design of the end product is of paramount importance. Please consider the heat

generation of the Display when making the system design. The coefficient of temperature increase

per input electric power is affected by the thermal resistance of the circuit board and density of

Display placement on the board, as well as other components. It is necessary to avoid intense

heat generation and operate within the maximum ratings given in this specification.

2) The operating current should be decided after considering the ambient maximum temperature of

Display .

—OTHERS

1) Care must be taken to ensure that the reverse voltage will not exceed the absolute maximum

rating when using the Display with matrix drive.

2) Flashing lights have been known to cause discomfort in people; you can prevent this by taking

precautions during use. Also, people should be cautious when using equipment that has had

Display incorporated into it.

3) The Display described in this brochure are intended to be used for ordinary electronic equipment

(such as office equipment, communications equipment, measurement instruments and household

appliances). Consult PARA’s sales staff in advance for information on the applications in which

exceptional quality and reliability are required , particularly when the failure or malfunction of the

Display may directly jeopardize life or health (such as for airplanes, aerospace, submersible

repeaters, nuclear reactor control systems, automobiles, traffic control equipment, life support

systems and safety devices).

DRAWING NO. : DS-11-02-0171

DATE : 2013-04-10

Page : 9

Share Link: