ST6285-EMU2 View Datasheet(PDF) - STMicroelectronics

Part Name

Description

View to exact match

ST6285-EMU2

REAL-TIME EMULATOR FOR THE ST6 MCU FAMILY

STMicroelectronics 

ST62xx-EMU2

GENERAL DESCRIPTION

The ST6 Real Time Development System is an

advanced hardware development system de-

signed and configured to provide comprehensive

support for the ST6 family of MCUs.

The ST6-HDS2 emulator is a modular system

made up of 2 boards:

– a main board common to all ST6-HDS2 emula-

tors and

– a dedication board (DBE) that is specific to a set

of devices.

The ST6GP-DBE offers some additional features

not supported by the other dedication boards:

– You can configure the ST6GP-DBE to emulate

any of 22 ST6 devices simply by selecting it from

a menu

– The entire configuration (device selection, op-

tions, clock rate...) is restored automatically each

time you load the .HEX file in the debugger.

– LVD emulation

– OSG emulation

This emulator can be driven by the WGDB6 De-

bugger or by the new Raisonance IDE (Ride) with

assembler or C source level debugging. The fol-

lowing functions are not available: time stamp,

profiling, code coverage.

3.1 Package Contents

– ST6-HDS2 Emulator

– A set of probes (including SOP adapters)

– Power supply

– Parallel interface cable

– "MCU on CD" CD-ROM

– User manual

3.2 EPROM/OTP programming board (to be

purchased separately)

When the code has been debugged using the em-

ulator, a separate programming tool such as the

ST6Exx-EPB, ST62xxx-KIT or a third-party pro-

grammer is needed to program the device with the

INTEL hex format file produced by the linker.

2/4

640

Share Link: