ADNS-2610 View Datasheet(PDF) - Agilent Technologies, Inc

Part Name

Description

View to exact match

ADNS-2610

Optical Mouse Sensor

Agilent Technologies, Inc 

Overview of Optical Mouse

Sensor Assembly

NOTE: Pin 1 of optical mouse

sensor should be inserted into

the reference point of mechanical

cutouts.

28.00

1.102

18.94

0.746

9.06

0.357

1.00

0.039

Clear Zone

φ 3.50

0.138

Figures 3 and 4 are shown with

HDNS-2100, HDNS-2200 and

HLMP-ED80-xx000.

Agilent Technologies provides an

IGES file drawing describing the

base plate molding features for

lens and PCB alignment.

The components shown in Figure

5 interlock as they are mounted

onto defined features on the base

plate.

The ADNS-2610 sensor is de-

signed for mounting on a through

hole PCB, looking down. There is

an aperture stop and features on

the package that align to the lens.

The HDNS-2100 lens provides

optics for the imaging of the

surface as well as illumination of

the surface at the optimum angle.

Features on the lens align it to

the sensor, base plate, and clip

with the LED. The lens also has a

large round flange to provide a

long creepage path for any ESD

events that occur at the opening

of the base plate.

12.60

0.496

11.10

0.437

0

1.25

0.049

13.73

1.35

0.053

4.91

0.193

7.45 0.541

0.293

29.15

1.148

MM

0

8X

φ

0.80

0.031

ALL DIMENSIONS INCH

Figure 3. Recommended PCB mechanical cutouts and spacing.

32.46

1.278

(Top view)

+X

+Y

19.10

0.752

Dimensions in mm/in.

(Side view)

PLASTIC SPRING

BASE PLATE

ESD LENS RING

CLIP

14.58

0.574

10.58

0.417

7.45

0.293

13.82

0.544

PCB

SENSOR

BASE PLATE ALIGNMENT POST

Figure 4. 2D assembly drawing of ADNS-2610 shown with the HLMP-ED80 (top and side view).

The HDNS-2200 clip holds the

LED in relation to the lens. The

LED’s leads must be formed first

before inserting into the clip.

Then, both LED and clip is

loaded on the PCB. The clip

interlocks the sensor to the lens,

and through the lens to the

alignment features on the base

plate.

The HLMP-ED80-xx000 is recom-

mended for illumination. If used

with the bin table (as shown in

Figure 8), sufficient illumination

can be guaranteed.

Figure 5. Exploded view drawing.

HDNS-2200 (Clip)

HLMP-ED80-xx000

ADNS-2610 (Sensor)

Customer supplied PCB

HDNS-2100 (Lens)

Customer supplied base plate

with recommended alignment

features per IGES drawing

3

Share Link: