datasheetbank_Logo   データシート検索エンジンとフリーデータシート
部品番号  

3-1462034-4 データシートの表示(PDF) - Tyco Electronics -> TE Connectivity

部品番号コンポーネント説明メーカー
3-1462034-4 FX2 Relay TYCO
Tyco Electronics -> TE Connectivity TYCO
3-1462034-4 Datasheet PDF : 11 Pages
1 2 3 4 5 6 7 8 9 10
AXICOM
Telecom-, Signal and RF Relays
FX2 Relay
108-98003 Rev. G
Insulation
Insulation resistance at 500 Vdc
Dielectric test voltage (1 min)
between coil and contacts
between adjacent contact sets
between open contacts
Surge voltage resistance
according to Telcordia GR 1089 (2 / 10 µs)
between coil and contacts
between adjacent contact sets
between open contacts
according to FCC 68 (10 / 160 µs) and IEC (10 / 700 µs)
between coil and contacts
between adjacent contact sets
between open contacts
Standard Version
High Dielectric Version
> 109 Ω
1800 Vrms
1800 Vrms
1800 Vrms
4000 Vrms
1500 Vrms
1500 Vrms
3500 V
2500 V
2500 V
3500 V
2500 V
2500 V
6000 V
2000 V
2000 V
6000 V
2000 V
2000 V
High Frequency Data
Capacitance
between coil and contacts
between adjacent contact sets
between open contacts
RF Characteristics
Isolation at 100 MHz / 900 MHz
Insertion loss at 100 MHz / 900 MHz
V.S.W.R. at 100 MHz / 900 MHz
max. 4 pF
max. 2 pF
max. 2 pF
- 34.0 dB / - 15.1 dB
- 0.03 dB / - 0.60 dB
1.07 / 1.45
General Data
Operate time at Unom typ. / max.
Reset time (latching) atUnom , typ. / max.
Duration of set / reset pulse (latching) min.
Release time without diode in parallel (non-latching), typ. / max.
Release time with diode in parallel (non-latching), typ. / max.
Bounce time at closing contact, typ. / max.
Maximum switching rate without load
Ambient temperature
Thermal resistance
Maximum permissible coil temperature
Vibration resistance (function)
3 ms / 4 ms
3 ms / 4 ms
20ms*
1 ms / 3 ms
3 ms / 4 ms
1 ms / 5 ms
50 operations/s
-55 °C ... +85 °C
< 165 K/W
125 °C
20 G 10 to 500 Hz
Shock resistance, half sinus, 11 ms
50 G (function)
1500 G (damage)
Degree of protection / Environmental protection
immersion cleanable, IP 67 / RT V
Needle flame test
application time 20 s, no burning
Mounting position
any
Processing information
Ultrasonic cleaning is not recommended
Weight (mass)
max. 2.5 g
Terminal surface
SnCu 0.7
Resistance to soldering heat
265 °C / 10 s
* Duration may be shorter depending on pulse shape, voltage applied and ambiente temperature
All data refers to 23 °C unless otherwise specified.
All specifications subject to change. Consult Tyco Electronics for latest specifications.
8 of 11
Direct download click here
 

Share Link : TYCO
All Rights Reserved © datasheetbank.com 2014 - 2019 [ 個人情報 保護方針 ] [ リクエストデータシート ]