datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

TS9222IYDT View Datasheet(PDF) - STMicroelectronics

Part Name
Description
View to exact match
TS9222IYDT Datasheet PDF : 14 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
Absolute maximum ratings and operating conditions
TS9222, TS9224
1
Absolute maximum ratings and operating conditions
Table 1. Absolute maximum ratings (AMR)
Symbol
Parameter
VCC
Vid
Vin
Tstg
Rthja
Supply voltage (1)
Differential input voltage (2)
Input voltage (3)
Storage temperature
Thermal resistance junction to ambient (4)
SO-8
TSSOP8
SO-14
TSSOP14
Value
14
±1
VCC- -0.3 to VCC+ +0.3
-65 to +150
Unit
V
V
V
°C
125
120
°C/W
66
100
Tj
ESD
Maximum junction temperature
HBM: human body model(5)
MM: machine model(6)
CDM: charged device model(7)
Output short circuit duration
Latch-up immunity
150
°C
2000
100
V
1500
see note(8)
200
mA
Soldering temperature (10 sec), unleaded version
260
°C
1. All voltage values, except differential voltage are with respect to network ground terminal.
2. Differential voltages are the non-inverting input terminal with respect to the inverting input terminal. If
Vid > ±1 V, the maximum input current must not exceed ±1 mA. In this case (Vid > ±1 V), an input series
resistor must be added to limit input current.
3. Do not exceed 14 V.
4. Short-circuits can cause excessive heating. Destructive dissipation can result from simultaneous short-
circuits on all amplifiers. These values are typical.
5. Human body model: a 100 pF capacitor is charged to the specified voltage, then discharged through a
1.5kΩ resistor between two pins of the device. This is done for all couples of connected pin combinations
while the other pins are floating.
6. Machine model: a 200 pF capacitor is charged to the specified voltage, then discharged directly between
two pins of the device with no external series resistor (internal resistor < 5 Ω). This is done for all couples of
connected pin combinations while the other pins are floating.
7. Charged device model: all pins and the package are charged together to the specified voltage and then
discharged directly to the ground through only one pin. This is done for all pins.
8. There is no short-circuit protection inside the device: short-circuits from the output to VCC can cause
excessive heating. The maximum output current is approximately 80mA, independent of the magnitude of
VCC. Destructive dissipation can result from simultaneous short-circuits on all amplifiers.
Table 2. Operating conditions
Symbol
Parameter
Value
Unit
VCC
Vicm
Toper
Supply voltage
Common mode input voltage range
Operating free air temperature range
2.7 to 12
V
VCC- -0.2 to VCC+ +0.2
V
-40 to +125
°C
2/14
Doc ID 15718 Rev 2
 

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]