datasheetbank_Logo     Технический паспорт Поисковая и бесплатно техническое описание Скачать

AOK8N80 Просмотр технического описания (PDF) - Alpha and Omega Semiconductor

Номер в каталогеКомпоненты Описаниепроизводитель
AOK8N80 800V,7.4A N-Channel MOSFET AOSMD
Alpha and Omega Semiconductor AOSMD
AOK8N80 Datasheet PDF : 5 Pages
1 2 3 4 5
AOK8N80
Electrical Characteristics (TJ=25°C unless otherwise noted)
Symbol
Parameter
Conditions
Min Typ Max Units
STATIC PARAMETERS
BVDSS Drain-Source Breakdown Voltage
ID=250µA, VGS=0V, TJ=25°C
ID=250µA, VGS=0V, TJ=150°C
BVDSS
/TJ
Zero Gate Voltage Drain Current
ID=250µA, VGS=0V
IDSS
Zero Gate Voltage Drain Current
VDS=800V, VGS=0V
VDS=640V, TJ=125°C
IGSS
Gate-Body leakage current
VDS=0V, VGS=±30V
VGS(th) Gate Threshold Voltage
VDS=5V, ID=250µA
RDS(ON) Static Drain-Source On-Resistance
VGS=10V, ID=4A
gFS
Forward Transconductance
VDS=40V, ID=4A
VSD
Diode Forward Voltage
IS=1A,VGS=0V
IS
Maximum Body-Diode Continuous Current
ISM
Maximum Body-Diode Pulsed Current
800
900
V
0.86
V/ oC
1
µA
10
±100 nΑ
3.3 3.9 4.5
V
1.35 1.63
9
S
0.72 1
V
7.4
A
26
A
DYNAMIC PARAMETERS
Ciss
Input Capacitance
Coss
Output Capacitance
Crss
Reverse Transfer Capacitance
Rg
Gate resistance
VGS=0V, VDS=25V, f=1MHz
VGS=0V, VDS=0V, f=1MHz
1100 1375 1650 pF
70 101 132 pF
6
11
16
pF
1.7 3.5 5.3
SWITCHING PARAMETERS
Qg
Total Gate Charge
Qgs
Gate Source Charge
VGS=10V, VDS=640V, ID=8A
Qgd
Gate Drain Charge
tD(on)
Turn-On DelayTime
tr
tD(off)
Turn-On Rise Time
Turn-Off DelayTime
VGS=10V, VDS=400V, ID=8A,
RG=25
tf
Turn-Off Fall Time
trr
Body Diode Reverse Recovery Time IF=8A,dI/dt=100A/µs,VDS=100V
Qrr
Body Diode Reverse Recovery Charge IF=8A,dI/dt=100A/µs,VDS=100V
20 26 32 nC
7.3
nC
9.1
nC
35
ns
51
ns
69
ns
41
ns
380 484 585 ns
4.5
6
7.5 µC
A. The value of R θJA is measured with the device in a still air environment with T A =25°C.
B. The power dissipation PD is based on TJ(MAX)=150°C, using junction-to-case thermal resistance, and is more useful in setting the upper
dissipation limit for cases where additional heatsinking is used.
C. Repetitive rating, pulse width limited by junction temperature TJ(MAX)=150°C, Ratings are based on low frequency and duty cycles to keep initial
TJ =25°C.
D. The R θJA is the sum of the thermal impedance from junction to case R θJC and case to ambient.
E. The static characteristics in Figures 1 to 6 are obtained using <300 µs pulses, duty cycle 0.5% max.
F. These curves are based on the junction-to-case thermal impedance which is measured with the device mounted to a large heatsink, assuming a
maximum junction temperature of TJ(MAX)=150°C. The SOA curve provides a single pulse rating.
G. L=60mH, IAS=3.8A, VDD=150V, RG=25, Starting TJ=25°C
THIS PRODUCT HAS BEEN DESIGNED AND QUALIFIED FOR THE CONSUMER MARKET. APPLICATIONS OR USES AS CRITICAL
COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS ARE NOT AUTHORIZED. AOS DOES NOT ASSUME ANY LIABILITY ARISING
OUT OF SUCH APPLICATIONS OR USES OF ITS PRODUCTS. AOS RESERVES THE RIGHT TO IMPROVE PRODUCT DESIGN,
FUNCTIONS AND RELIABILITY WITHOUT NOTICE.
Rev0: Jul 2012
www.aosmd.com
Page 2 of 5
Direct download click here

 

Share Link : 

All Rights Reserved © datasheetbank.com 2014 - 2020 [ политика конфиденциальности ] [ Запрос Даташит ]