GRM155R70G105KA12D View Datasheet(PDF) - Murata Manufacturing

Part Name

Description

View to exact match

GRM155R70G105KA12D

Chip Multilayer Ceramic Capacitors for General Purpose

Murata Manufacturing 

No.

Item

15 High

Appearance

Temperature

High Humidity Capacitance

(Steady)

Change

Q or D.F.

Specification

No defects or abnormalities.

Within +/-12.5%

DF:0.2 max.

I.R.

More than 500MΩ or 12.5Ω･F (Whichever is smaller)

16 Durability

Appearance No defects or abnormalities.

Capacitance Within +/-12.5%

Change

Q or D.F. DF:0.2 max.

I.R.

More than 1000MΩ or 25Ω･F (Whichever is smaller)

Test Method (Ref. Standard:JIS C 5101, IEC60384)

Solder the capacitor on the test substrate shown in Fig.3.

Test Temperature :

40+/-2℃

Test Humidity :

90%RH to 95%RH

Test Time :

500+/-12h

Test Voltage :

Rated Voltage

Charge/Discharge Current : 50mA max.

Pre-treatment :

Post-treatment :

Perform a heat treatment at 150+0/-10°C for 1hour and then let sit for 24+/-2hours at room temperature, then measure.

Perform a heat treatment at 150+0/-10°C for 1hour and then let sit for 24+/-2hours at room temperature, then measure.

Solder the capacitor on the test substrate shown in Fig.3.

Test Temperature :

Maximum Operating Temperature+/-3℃

Test Time :

1000+/-12h

Test Voltage :

150% of the rated voltage

Charge/Discharge Current : 50mA max.

Pre-treatment :

Post-treatment :

Perform a heat treatment at 150+0/-10°C for 1hour and then let sit for 24+/-2hours at room temperature, then measure.

Perform a heat treatment at 150+0/-10°C for 1hour and then let sit for 24+/-2hours at room temperature, then measure.

GRM155R70G105KA12-01A

Share Link: