datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

JA1C-TM-DC6V View Datasheet(PDF) - Panasonic Corporation

Part Name
Description
View to exact match
JA1C-TM-DC6V
Panasonic
Panasonic Corporation Panasonic
JA1C-TM-DC6V Datasheet PDF : 4 Pages
1 2 3 4
JA
JA-RELAYS 1 HORSE-POWER
COMPACT POWER RELAYS
30.1
1.185
34.7
1.366
28.5
1.122
TMP type
30.1
1.185
TM type
UL File No.: E43028
34.7
1.366
CSA File No.: LR26550
• High switching capacity — 55 A inrush, 15 A steady state
28.5
inductive load (1 Form A)
1.122
• Particularly suitable for air conditioners, dish washers,
microwave ovens, ranges, central cleaning systems,
copiers, facsimiles, etc.
• Two types available
“TM” type for direct chassis mounting
“TMP” type for PC board mounting
mm inch • TV-rated types available
• TÜV also approved
SPECIFICATIONS
Contact
Arrangement
1 Form A, 1 Form B, 1 Form C
Initial contact resistance, max.
(By voltage drop 6 V DC 1 A)
Contact material
Rating Maximum switching power
(resistive Maximum switching voltage
load)
Max. switching current
Mechanical (at 180 cpm.)
Expected
1 Form A (Inrush 55 A,
Steady 15 A 250 VAC
life (min. Electrical cosϕ = 0.7)
operations) (at 20 cpm.) 1 Form B, 1 Form C
(15 A 250 VAC,
cosϕ = 1)
30 m
Silver alloy
3,750 VA
250 V AC
15A
5×106
105
5×105
Coil
Nominal operating
power
Minimum operating
power
DC type
AC type
DC type
AC type
1.2 W
1.4 VA (50 Hz)/1.3 VA (60 Hz)
0.77 W
0.90 VA (50 Hz)/0.84 VA (60 Hz)
Remarks
*1 Measurement at same location as “Initial breakdown voltage” section
*2 Detection current: 10mA
*3 Wave is standard shock voltage of ±1.2 × 50µs according to JEC-212-1981
*4 Excluding contact bounce time
*5 For the AC coil types, the operate/release time will differ depending on the phase.
*6 Half-wave pulse of sine wave: 11ms; detection time: 10µs
*7 Half-wave pulse of sine wave: 6ms
*8 Detection time: 10µs
*9 Refer to 6. Usage, transport and storage conditions NOTES (Page 8)
Characteristics
Maximum operating speed
Initial insulation resistance*1
Initial break- Between open contacts
down voltage*2 Between contacts and coil
Surge voltage between
contacts and coil*3
Operate time*4
(at 20°C) (at nominal voltage)
Release time(without diode)*4
(at 20°C) (at nominal voltage)
Temperature rise (at 50°C)
(resistive)
20 cpm.
Min. 100 Mat 500 V DC
1,500 Vrms
2,000 Vrms
Min. 5,000 V
Approx. 10 ms*5
Approx. 2 ms*5
Max. 70°C
Shock
resistance
Functional*6
Destructive*7
98 m/s2 {10 G}
980 m/s2 {100 G}
Vibration
resistance
Functional*8
Destructive
88.2 m/s2 {9 G}, 10 to 55 Hz
at double amplitude of 1.5 mm
117.6 m/s2 {12 G}, 10 to 55 Hz
at double amplitude of 2.0 mm
Conditions for operation, Ambient
transport and storage*9 temp.
(Not freezing and condens-
ing at low temperature) Humidity
–10°C to +50°C +14°F to +122°F
5 to 85%R.H.
Unit weight
44 g 1.55 oz
TYPICAL APPLICATIONS
Air conditioners, microwave ovens, load
management equipment, copiers,
process control equipment
ORDERING INFORMATION
Ex. JA 1a
TM
DC12V
Contact
arrangement
Mounting classification
Coil voltage
1c: 1 Form C
1a: 1 Form A
1b: 1 Form B
TM: Solder Terminal
TMP: Solder Teminal
and PCB Teminal
DC 6, 12, 24 V
AC 6, 12, 24, 115 V
(Notes) 1. For UL/CSA recognized types, add suffix UL/CSA.
(Notes) 2. Standard packing Carton: 20 pcs.; Case: 200 pcs.
P
Classification
Nil: Standard type
P: Up-graded contact
rating type
(See next page)
 

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]