datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

W25Q32FVSSIP View Datasheet(PDF) - Winbond

Part Name
Description
View to exact match
W25Q32FVSSIP
Winbond
Winbond Winbond
W25Q32FVSSIP Datasheet PDF : 99 Pages
First Prev 41 42 43 44 45 46 47 48 49 50 Next Last
W25Q32FV
8.2.14 Set Burst with Wrap (77h)
In Standard SPI mode, the Set Burst with Wrap (77h) instruction is used in conjunction with “Fast Read
Quad I/O” and “Word Read Quad I/O” instructions to access a fixed length of 8/16/32/64-byte section
within a 256-byte page. Certain applications can benefit from this feature and improve the overall system
code execution performance.
Similar to a Quad I/O instruction, the Set Burst with Wrap instruction is initiated by driving the /CS pin low
and then shifting the instruction code “77h” followed by 24 dummy bits and 8 “Wrap Bits”, W7-0. The
instruction sequence is shown in Figure 28. Wrap bit W7 and the lower nibble W3-0 are not used.
W6, W5
00
01
10
11
W4 = 0
Wrap Around
Wrap Length
Yes
8-byte
Yes
16-byte
Yes
32-byte
Yes
64-byte
W4 =1 (DEFAULT)
Wrap Around Wrap Length
No
N/A
No
N/A
No
N/A
No
N/A
Once W6-4 is set by a Set Burst with Wrap instruction, all the following “Fast Read Quad I/O” and “Word
Read Quad I/O” instructions will use the W6-4 setting to access the 8/16/32/64-byte section within any
page. To exit the “Wrap Around” function and return to normal read operation, another Set Burst with
Wrap instruction should be issued to set W4 = 1. The default value of W4 upon power on or after a
software/hardware reset is 1.
In QPI mode, the “Burst Read with Wrap (0Ch)” instruction should be used to perform the Read operation
with “Wrap Around” feature. The Wrap Length set by W5-4 in Standard SPI mode is still valid in QPI mode
and can also be re-configured by “Set Read Parameters (C0h)” instruction. Refer to 8.2.44 and 8.2.45 for
details.
/CS
CLK
Mode 3
Mode 0
IO0
IO1
IO2
IO3
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Mode 3
Instruction (77h)
don't
care
don't
care
don't
care
Wrap Bit
Mode 0
X X X X X X w4 X
X X X X X X w5 X
X X X X X X w6 X
XXXXXXXX
Figure 28. Set Burst with Wrap Instruction (SPI Mode only)
- 48 -
Publication Release Date: Sept 16,, 2013
Revision H
 

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]