datasheetbank_Logo   Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site
Part Name :   

W25Q80DVZPI View Datasheet(PDF) - Winbond

Part NameDescriptionManufacturer
W25Q80DVZPI 3V 8M-BIT SERIAL FLASH MEMORY WITH DUAL AND QUAD SPI Winbond
Winbond Winbond
W25Q80DVZPI Datasheet PDF : 71 Pages
First Prev 41 42 43 44 45 46 47 48 49 50 Next Last
W25Q80DV
Erase / Program Resume (7Ah)
The Erase/Program Resume instruction “7Ah” must be written to resume the Sector or Block Erase
operation or the Page Program operation after an Erase/Program Suspend. The Resume instruction
“7Ah” will be accepted by the device only if the SUS bit in the Status Register equals to 1 and the BUSY
bit equals to 0. After issued the SUS bit will be cleared from 1 to 0 immediately, the BUSY bit will be set
from 0 to 1 within 200ns and the Sector or Block will complete the erase operation or the page will
complete the program operation. If the SUS bit equals to 0 or the BUSY bit equals to 1, the Resume
instruction “7Ah” will be ignored by the device. The Erase/Program Resume instruction sequence is
shown in figure 26.
Resume instruction is ignored if the previous Erase/Program Suspend operation was interrupted by
unexpected power off. It is also required that a subsequent Erase/Program Suspend instruction not to
be issued within a minimum of time of “tSUS” following a previous Resume instruction.
Figure 26a. Erase/Program Resume Instruction Sequence
- 41 -
Publication Release Date:July 21, 2015
Prelimry-Revision G
Direct download click here
 

Share Link : Winbond
All Rights Reserved © datasheetbank.com 2014 - 2019 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]