datasheetbank_Logo   Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site
Part Name :   

W25Q80DVZPI View Datasheet(PDF) - Winbond

Part NameDescriptionManufacturer
W25Q80DVZPI 3V 8M-BIT SERIAL FLASH MEMORY WITH DUAL AND QUAD SPI Winbond
Winbond Winbond
W25Q80DVZPI Datasheet PDF : 71 Pages
First Prev 31 32 33 34 35 36 37 38 39 40 Next Last
W25Q80DV
Set Burst with Wrap (77h)
The Set Burst with Wrap (77h) instruction is used in conjunction with “Fast Read Quad I/O” and “Word
Read Quad I/O” instructions to access a fixed length of 8/16/32/64-byte section within a 256-byte page.
Certain applications can benefit from this feature and improve the overall system code execution
performance.
Similar to a Quad I/O instruction, the Set Burst with Wrap instruction is initiated by driving the /CS pin
low and then shifting the instruction code “77h” followed by 24 dummy bits and 8 “Wrap Bits”, W7-0. The
instruction sequence is shown in figure 15. Wrap bit W7 and the lower nibble W3-0 are not used.
W6, W5
00
01
10
11
W4 = 0
Wrap Around
Wrap Length
Yes
8-byte
Yes
16-byte
Yes
32-byte
Yes
64-byte
W4 =1 (DEFAULT)
Wrap Around Wrap Length
No
N/A
No
N/A
No
N/A
No
N/A
Once W6-4 is set by a Set Burst with Wrap instruction, all the following “Fast Read Quad I/O”
instructions will use the W6-4 setting to access the 8/16/32/64-byte section within any page. To exit the
“Wrap Around” function and return to normal read operation, another Set Burst with Wrap instruction
should be issued to set W4 = 1. The default value of W4 upon power on is 1. In the case of a system
Reset while W4 = 0, it is recommended that the controller issues a Set Burst with Wrap instruction to
reset W4 = 1 prior to any normal Read instructions since W25Q80DV does not have a hardware Reset
Pin.
/CS
CLK
IO0
IO1
IO2
IO3
Mode 3
Mode 0
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Instruction (77h)
X X X X X X w4 X
X X X X X X w5 X
X X X X X X w6 X
XXXXXXXX
dont care dont care dont care wrap bit
Figure 15. Set Burst with Wrap Instruction Sequence
- 33 -
Publication Release Date:July 21, 2015
Prelimry-Revision G
Direct download click here
 

Share Link : Winbond
All Rights Reserved © datasheetbank.com 2014 - 2019 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]