datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

W25Q64FVSFIQ View Datasheet(PDF) - Winbond

Part Name
Description
View to exact match
W25Q64FVSFIQ Datasheet PDF : 89 Pages
First Prev 51 52 53 54 55 56 57 58 59 60 Next Last
W25Q64FV
6.2.31 Read Manufacturer / Device ID Dual I/O (92h)
The Read Manufacturer / Device ID Dual I/O instruction is an alternative to the Read Manufacturer /
Device ID instruction that provides both the JEDEC assigned manufacturer ID and the specific device ID
at 2x speed.
The Read Manufacturer / Device ID Dual I/O instruction is similar to the Fast Read Dual I/O instruction.
The instruction is initiated by driving the /CS pin low and shifting the instruction code “92h” followed by a
24-bit address (A23-A0) of 000000h, but with the capability to input the Address bits two bits per clock.
After which, the Manufacturer ID for Winbond (EFh) and the Device ID are shifted out 2 bits per clock on
the falling edge of CLK with most significant bits (MSB) first as shown in Figure 30. The Device ID values
for the W25Q64FV is listed in Manufacturer and Device Identification table. The Manufacturer and Device
IDs can be read continuously, alternating from one to the other. The instruction is completed by driving
/CS high.
/CS
CLK
Mode 3
Mode 0
DI
(IO0)
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
Instruction (92h)
A23-16
A15-8
A7-0 (00h)
M7-0
6420642064206420
DO
(IO1)
* = MSB
High Impedance
7531753175317531
*
*
*
*
/CS
CLK
DI
(IO0)
DO
(IO1)
23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38
IOs switch from
Input to Output
06420642064206420
17531753175317531
* MFR ID
* Device ID
* MFR ID
(repeat)
* Device ID
(repeat)
Mode 3
Mode 0
Note:
Figure 30. Read Manufacturer / Device ID Dual I/O Instruction (SPI Mode only)
The “Continuous Read Mode” bits M(7-0) must be set to Fxh to be compatible with Fast Read Dual I/O instruction.
- 58 -
 

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]