datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

25Q64FVBIG View Datasheet(PDF) - Winbond

Part Name
Description
View to exact match
25Q64FVBIG Datasheet PDF : 89 Pages
First Prev 31 32 33 34 35 36 37 38 39 40 Next Last
W25Q64FV
/CS
CLK
Mode 3
Mode 0
IO0
0 1 2 3 4 5 6 7 8 9 10 11 12 13
A23-16 A15-8
A7-0
M7-0 Dummy
IOs switch from
Input to Output
20 16 12 8 4 0 4 0
40404
IO1
21 17 13 9 5 1 5 1
51515
IO2
22 18 14 10 6 2 6 2
62626
IO3
23 19 15 11 7 3 7 3
73737
Byte 1 Byte 2 Byte 3
Figure 16b. Word Read Quad I/O Instruction (Previous instruction set M5-4 = 10, SPI Mode only)
Word Read Quad I/O with “8/16/32/64-Byte Wrap Around” in Standard SPI mode
The Word Read Quad I/O instruction can also be used to access a specific portion within a page by
issuing a “Set Burst with Wrap” (77h) command prior to E7h. The “Set Burst with Wrap” (77h) command
can either enable or disable the “Wrap Around” feature for the following E7h commands. When “Wrap
Around” is enabled, the data being accessed can be limited to either a 8, 16, 32 or 64-byte section of a
256-byte page. The output data starts at the initial address specified in the instruction, once it reaches the
ending boundary of the 8/16/32/64-byte section, the output will wrap around to the beginning boundary
automatically until /CS is pulled high to terminate the command.
The Burst with Wrap feature allows applications that use cache to quickly fetch a critical address and then
fill the cache afterwards within a fixed length (8/16/32/64-byte) of data without issuing multiple read
commands.
The “Set Burst with Wrap” instruction allows three “Wrap Bits”, W6-4 to be set. The W4 bit is used to
enable or disable the “Wrap Around” operation while W6-5 are used to specify the length of the wrap
around section within a page. See 7.2.19 for detail descriptions.
- 40 -
 

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]