datasheetbank_Logo    Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site
Part Name :

W25Q64FVSFIQ View Datasheet(PDF) - Winbond

Part NameW25Q64FVSFIQ Winbond
Winbond Winbond
Description3V 64M-BIT SERIAL FLASH MEMORY WITH DUAL/QUAD SPI & QPI
W25Q64FVSFIQ Datasheet PDF : 89 Pages
First Prev 11 12 13 14 15 16 17 18 19 20 Next Last
5. FUNCTIONAL DESCRIPTIONS
5.1 SPI/QPI OPERATIONS
W25Q64FV
Power On
Reset (66h + 99h)
Device
Initialization
Reset (66h + 99h)
Standard SPI
Dual SPI
Quad SPI
operations
Enable QPI (38h)
Disable QPI (FFh)
QPI
operations
Figure 3. W25Q64FV Serial Flash Memory Operation Diagram
5.1.1 Standard SPI Instructions
The W25Q64FV is accessed through an SPI compatible bus consisting of four signals: Serial Clock (CLK),
Chip Select (/CS), Serial Data Input (DI) and Serial Data Output (DO). Standard SPI instructions use the
DI input pin to serially write instructions, addresses or data to the device on the rising edge of CLK. The
DO output pin is used to read data or status from the device on the falling edge of CLK.
SPI bus operation Mode 0 (0,0) and 3 (1,1) are supported. The primary difference between Mode 0 and
Mode 3 concerns the normal state of the CLK signal when the SPI bus master is in standby and data is
not being transferred to the Serial Flash. For Mode 0, the CLK signal is normally low on the falling and
rising edges of /CS. For Mode 3, the CLK signal is normally high on the falling and rising edges of /CS.
5.1.2 Dual SPI Instructions
The W25Q64FV supports Dual SPI operation when using instructions such as Fast Read Dual Output
(3Bh)” and “Fast Read Dual I/O (BBh). These instructions allow data to be transferred to or from the
device at two to three times the rate of ordinary Serial Flash devices. The Dual SPI Read instructions are
ideal for quickly downloading code to RAM upon power-up (code-shadowing) or for executing non-speed-
critical code directly from the SPI bus (XIP). When using Dual SPI instructions, the DI and DO pins
become bidirectional I/O pins: IO0 and IO1.
- 12 -
Direct download click here
 

GENERAL DESCRIPTION
The W25Q64FV (64M-bit) Serial Flash memory provides a storage solution for systems with limited space, pins and power. The 25Q series offers flexibility and performance well beyond ordinary Serial Flash devices. They are ideal for code shadowing to RAM, executing code directly from Dual/Quad SPI (XIP) and storing voice, text and data. The device operates on a single 2.7V to 3.6V power supply with current consumption as low as 4mA active and 1µA for power-down. All devices are offered in space saving packages.

 

Share Link : Winbond
@ 2014 - 2018  [ Home ] [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]